Siemens 6SL3350-6TK00-0BA0 Control Interface Module
An active SINAMICS control interface module spare for Siemens liquid-cooled drive devices.
Technical Summary
6SL3350-6TK00-0BA0 is a Siemens SINAMICS Control Interface Module supplied as a spare for liquid-cooled devices. Siemens lists the article as an active service product rather than a complete commissioned drive.
The CIM belongs inside a defined host power device. Host article, hardware execution, internal connectors, coolant-isolation state and service procedure must therefore be established before replacement.
Specifications
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3350-6TK00-0BA0 |
| Product Type | Control Interface Module (CIM) spare |
| Application | Liquid-cooled SINAMICS devices |
| Lifecycle Status | PM300: Active product |
| Quantity Unit | 1 piece |
| Catalog | D21.3LD |
| Commodity Code | 85049090 |
| Export Classification | AL N / ECCN EAR99 |
| Country of Origin | Germany |
Features
- Provides the dedicated control-interface assembly used by the documented liquid-cooled power device.
- Retains the Siemens article identity required for service and spare-parts handling.
- Supports module-level repair without representing a complete drive replacement.
- Uses host-specific internal connections that must be matched before energization.
Compatibility
- Match the complete host SINAMICS article, serial number and hardware revision.
- Confirm that the installed device is the liquid-cooled execution covered by this CIM.
- Inspect mating connectors, low-voltage supplies and fiber or signal links identified by the service documentation.
- Coordinate coolant isolation, discharge and lockout with qualified drive-service personnel.
Replacement
- Save the drive project, parameters, diagnostics and installed option inventory before shutdown.
- Label every internal connector and verify the DC link is discharged under the applicable Siemens procedure.
- After assembly, complete insulation, coolant, communication, diagnostic and controlled functional checks before production release.
FAQ
Can 6SL3350-6TK00-0BA0 be installed in an air-cooled SINAMICS device?
The Siemens description assigns it to liquid-cooled devices; use it only where the exact host documentation confirms this CIM.
Is 6SL3350-6TK00-0BA0 a complete drive replacement?
No. It is a control interface module spare, so the surrounding power hardware, cooling system and control project remain part of the repair.
What host data is needed to quote 6SL3350-6TK00-0BA0 correctly?
Provide the host article, serial number, hardware revision, installed CIM label, cooling execution, fault history and connector photographs.
Can 6SL3350-6TK00-0BA0 be exchanged without a parameter backup?
A hardware exchange should not begin without a verified project and parameter record because restoration and acceptance testing depend on the installed drive configuration.
Which service risks are most important for 6SL3350-6TK00-0BA0?
High stored energy, coolant handling, electrostatic damage and internal-connector errors require qualified personnel and the host-specific service procedure.
What should be tested after fitting 6SL3350-6TK00-0BA0?
Check coolant integrity, internal supplies, communications, diagnostic status, interlocks and a controlled motor run before returning the machine to service.
Recommended Models
| SL5/1 | ISA-MYM-A-200-20-1000-T2-X10-AQ-B-EU | 017-529566 |
| ZS 73 W 73.9.42.0.01 | PS41US | 757-1A-T |
| GI356.1226D29 335180 | 1SAZ721201R1021 | MTN649310 |
| B&R 8BVI0014HWSS.000-1 | BFK458-06N 00530127 | S500A-V5.0 |
| Festo ADVUL-32-80-P-A | SDX611 1287833F4 | VFF5 |
| 16TX 2891933 | Di-Soric OGL 081 P3K-TSSL | 1SVR730824R9300 |
| RF47 CMP63M/BK/KY/RH1M/SB1 | ABB ACS800-04-0400-3+E210+K454+L509+N651 | SVX075A1-5A4B1 |
| CPM51 CPM52-A5V5-I2-NN-AD | 1435000z10001 | X20BC0063 |
| CP1L-M40DT1-D | FUF 050B4002 | EC2895 |
| BAE00TK | TM-104-0-PN-A---0 | 1FT6086-8WK71-4AH1 |
