Siemens 6SL3352-6TG37-4AA3 SINAMICS Control Interface Module
A complete-MLFB service component matched to a specific SINAMICS power section, connector set and cabinet execution.
Overview
6SL3352-6TG37-4AA3 is a Siemens SINAMICS replacement control interface component identified in the manufacturer service-parts relationship for its matched power section.
The full 6SL3352-6TG37-4AA3 ordering number is essential. Similar 6SL3352 modules represent different power ratings and hardware executions, so the host module MLFB, board label, plugs and cabinet position must all agree.
Specs
| Manufacturer | Siemens |
|---|---|
| Model | 6SL3352-6TG37-4AA3 |
| Drive Platform | SINAMICS |
| Product Class | Replacement control interface module |
| Matched Service Context | Manufacturer-defined SINAMICS power-section assembly |
| Related Host Evidence | Complete power-section MLFB, serial number and board labels |
| Revision Boundary | Full TG37-4AA3 suffix required |
| Connector Boundary | All power-stage, control and auxiliary plugs must match the installed assembly |
| Configuration Evidence | Drive project, parameters, firmware and option-module record |
| Handling | Cabinet isolation, stored-energy discharge and ESD protection |
| Commissioning Basis | Diagnostics, interface checks and controlled drive test |
Features
Exact Siemens MLFB establishes the service component identity.
Interfaces control electronics with the matched SINAMICS power section.
Suffix-controlled selection separates it from visually related interface modules.
Replacement workflow preserves parameters, connectors and cabinet position.
Applications
- Service of the documented SINAMICS cabinet power module.
- Drive repair after diagnostics isolate the interface assembly.
- Controlled spares programs requiring exact MLFB and host-module traceability.
Lifecycle
- Back up drive parameters, project data, firmware information and fault history.
- Photograph the 6SL3352-6TG37-4AA3 label, host module nameplate and every plug before removal.
- Verify cabinet isolation and DC-link discharge, then apply ESD controls.
- Restore only the approved configuration and complete diagnostics, interlock, communication and controlled motor tests.
FAQ
Can another 6SL3352 board replace 6SL3352-6TG37-4AA3?
Not by appearance. The full MLFB, host power section, connector arrangement and documented Siemens service relationship must agree.
What should accompany a request for 6SL3352-6TG37-4AA3?
Include both board labels, complete host module nameplate, plug photographs, drive project and diagnosed fault record.
Why save configuration before changing 6SL3352-6TG37-4AA3?
The commissioned power section depends on the correct drive parameters, firmware, option setup and communication assignment.
What cabinet checks matter before handling 6SL3352-6TG37-4AA3?
Confirm all energy sources are isolated, the DC link is discharged, grounding is intact and ESD precautions are active.
What demonstrates a successful 6SL3352-6TG37-4AA3 exchange?
Stable diagnostics, correct connector recognition, matching configuration, working interlocks and an acceptable controlled-load test.
Recommended Models
| 39D1301-050 | SGR24/1G | 6ES5375-0LC41 |
| VCL-E1-030 | ST100S | 87.0634-014-NT-A6373/Pico/32-1/S1.6 |
| 4PP420.1505-75 | B84144A0016R000 | Ve 2424 D/C |
| DGSL-12-50-Y3A | D41VW043E2NJWTI5N91 / D1VW004EN | ABB 83310-500 8300-0-0126 |
| Siemens 3TB4717-0A | BO5988.47/424 0047883 | EM 3490 |
| EGT1/4R2000 001371 | IC694MDL916-CA | SEW FH67 CMP80M/BP/PK/AK0H/SB1 |
| KP 60 07910821 | Beckhoff AX 5901-0000 | 6ES7331-7NF00-0AB0 |
| B&R X67BC8321.L12 | Rittal SZ 4138.350 | SR-751 |
| DPZ-16-100-P-A-KF-S2 | VTLS 18/00401 | MHS095C-058-AS1-BNNNN |
| DRP100LC2/TF/LN | 88974041 M3 CD12- 8I/4O | 3IF661.9 |
