Restores the documented forced-cooling assembly in supported built-in drive modules.
Product Identification
6SL3362-0AG00-0AA1 is a Siemens replacement fan supplied as a complete assembly kit for built-in AC Drive, Power and Motor Modules.
Siemens lists the kit for frame sizes G, H and J in SINAMICS and MICROMASTER PX contexts. It is an active spare product rather than a generic cabinet fan.
Selection should use the complete MLFB and the host-module nameplate because adjacent fan kits cover different frames and assemblies.
Engineering Data
ManufacturerSiemens
Exact model6SL3362-0AG00-0AA1
Product typeReplacement fan, complete assembly kit
System familiesSINAMICS / MICROMASTER PX
Compatible built-in module classesAC Drive Module; Power Module; Motor Module
Frame sizesG, H and J
LifecyclePM300 active product
Quantity unit1 piece
Country of originGermany
Commodity code84145935
RoHS compliance date25 February 2003
Functions
Supplies the fan as a complete kit rather than a loose, generic motor.
Covers the Siemens frame-size range stated for G, H and J modules.
Keeps airflow service tied to the exact host-module identity.
Applications
- Preventive cooling maintenance on supported SINAMICS built-in units.
- Replacement after diagnosed fan failure or documented service interval.
- MICROMASTER PX and SINAMICS spare inventories organized by host frame.
- Turnaround work where the complete fan kit and safe lifting plan are prepared.
Lifecycle
- Record the host module MLFB, frame and fan alarm history.
- Isolate the drive and verify DC-link discharge before opening the assembly.
- Protect airflow paths and inspect heat sinks for contamination during service.
- After installation, verify fan direction, unobstructed airflow and temperature behavior under load.
About IndustryParts
https://www.industryparts.com/Cooling spares are selected by host frame and full MLFB
IndustryParts handles 6SL3362-0AG00-0AA1 as a complete Siemens fan kit for the documented built-in module range.
- Host frame confirmed
- Complete kit identity retained
- Airflow checks planned
FAQ
Q01What should accompany a 6SL3362-0AG00-0AA1 enquiry?
Provide the fan label, complete host-module MLFB, frame size, alarm history, photographs, quantity and destination.
Q02Can a generic fan replace 6SL3362-0AG00-0AA1?
Do not substitute by physical size alone. Airflow, connector, mounting, monitoring and complete-kit contents must match Siemens requirements.
Q03Which frame sizes does 6SL3362-0AG00-0AA1 cover?
Siemens lists the complete kit for built-in modules in frame sizes G, H and J. Confirm the exact host MLFB.
Q04What else should be inspected during fan replacement?
Inspect heat sinks, ducts, filters, connectors, cable routing and contamination that could restrict airflow.
Q05What proves 6SL3362-0AG00-0AA1 is ready for service?
Confirm exact kit and host, correct rotation and airflow, clear fan diagnostics and stable temperature during an approved load test.
