Siemens 6SY7000-0AB30 Radial Fan Unit 220
A Siemens radial fan assembly made for SIMOVERT MASTERDRIVES equipment in device design F.
Key Information
6SY7000-0AB30 is the Siemens spare-part radial fan unit 220 for equipment built in device design F. The complete article number controls the mechanical and electrical fan execution; a similar 6SY7000 article may identify a different transformer, capacitor or fan assembly.
Siemens lists the product as no longer available and in its final support phase. A replacement decision must therefore begin with the converter MLFB, installed fan label, connector arrangement and airflow direction rather than with housing size alone.
The fan belongs to the converter cooling path. Inspection should include the air passages, heat sinks, mounting hardware and supply connection so a new fan is not fitted into a restricted or electrically damaged cooling circuit.
Functions
Converter airflow
Moves cooling air through the designated design-F converter assembly.
Thermal support
Maintains the forced-air path used by power-semiconductor and heat-sink components.
Service traceability
Keeps the fan identity tied to the original Siemens article and host converter.
Legacy maintenance
Supports controlled repair where the obsolete cooling assembly is still documented.
Specifications
- Manufacturer
- Siemens
- Exact model
- 6SY7000-0AB30
- Manufacturer description
- Radial fan unit 220
- Host construction
- SIMOVERT MASTERDRIVES device design F
- Quantity unit
- One piece
- Country of origin
- Germany
- UPC
- 662643073256
- Commodity code
- 84145935
- RoHS status
- Manufacturer record states not RoHS-compliant
- Selection evidence
- Converter MLFB, fan label, supply connector and airflow direction
About IndustryParts
https://www.industryparts.com/Cooling spares remain linked to the converter record
IndustryParts keeps the Siemens fan article, design-F host identity, connector evidence and requested quantity together so the proposed spare can be checked as a complete cooling assembly.
Installation
Capture the cooling path
Record the converter rating plate, fan label, connector polarity, mounting orientation and airflow arrow before removal.
Inspect surrounding hardware
Clean approved air passages and check guards, heat sinks and wiring for damage without altering the designed ducting.
Prove thermal operation
Confirm rotation, airflow, vibration, current draw and converter temperature behavior under the approved service test.
Lifecycle
Obsolescence control
Keep a verified spare strategy because Siemens records this article as no longer available.
Bearing and vibration record
Investigate noise, drag and imbalance before they affect converter cooling performance.
Host-linked inventory
Store 6SY7000-0AB30 with the exact design-F converter context, not as a generic radial fan.
Related Models
FAQ
What evidence prevents the wrong fan from being supplied for 6SY7000-0AB30?
Provide the host converter MLFB, complete fan label, connector photograph, mounting view and airflow direction.
Can a 220 V fan with a similar frame replace 6SY7000-0AB30?
Not from voltage and dimensions alone; impeller direction, connector, mounting, airflow and Siemens host approval must also match.
What should be inspected when 6SY7000-0AB30 fails repeatedly?
Check blocked ducts, heat-sink contamination, supply quality, connector heating and mechanical interference before fitting another fan.
How does the discontinued status affect 6SY7000-0AB30 planning?
Maintain a verified spare and document the installed execution because Siemens records the article as no longer available.
What closes a 6SY7000-0AB30 replacement record?
Record correct rotation, stable airflow, acceptable vibration and current, and normal converter temperature under load.
