Retains the exact A5E01424398 code for board-level traceability.
Technical Summary
A5E01424398 identifies a Siemens drive-system electronic board assembly associated with converter power-section service. The complete A5E number is the primary procurement identity.
Board-level compatibility cannot be determined from an A5E prefix alone. The host converter, power-section rating, board revision, connector keying and approved Siemens service record must be compared.
Specifications
| Manufacturer | Siemens |
|---|---|
| Exact board identity | A5E01424398 |
| Product class | Drive-system electronic board assembly |
| Service boundary | Host converter and installed power section |
| Revision control | Full printed board and assembly labels required |
| Electrical values | Use host equipment documentation and board label |
| Replacement basis | Siemens-approved service reference or exact like-for-like identity |
Features
Associates the spare with its converter and power-section record instead of a generic drive family.
Requires connector, revision and controlled-hardware comparison before installation.
Supports documented ESD handling and drive-service commissioning.
Compatibility
- Provide the complete converter nameplate, power-section identification and photographs of both sides of the installed board.
- Compare board revision, connector count, connector orientation, mounting points and adjacent assemblies.
- Confirm the applicable Siemens service documentation and whether the board is supplied as part of a larger spare assembly.
- Do not energize a board selected solely by appearance or an incomplete A5E number.
Replacement
- Apply lockout, verify DC-link discharge and follow ESD controls before opening the drive.
- Label gate, feedback, auxiliary and ribbon connections before disturbing the assembly.
- Inspect cooling, insulation, plugs and nearby power components for the original failure cause.
- After installation, review diagnostics and test the affected drive function at a controlled load.
FAQ
What photographs are needed to quote A5E01424398?
Provide the converter nameplate, full board labels, both board faces, connectors, mounting location and adjacent power-section identity.
Can A5E01424398 be selected only from the Siemens A5E number?
The exact number is necessary but the host converter, revision and approved service relationship must also match.
What commonly causes repeat failure around A5E01424398?
Investigate power components, cooling, insulation, connectors, supply quality and the original drive fault before fitting another board.
Should field wiring be moved during an A5E01424398 exchange?
Only the documented board connections should be disturbed, with every plug labeled and verified against the service procedure.
What acceptance record should follow A5E01424398 replacement?
Record board identity, diagnostics, drive-ready state and a controlled functional test of the affected power section.
About IndustryParts
https://www.industryparts.com/Board-level enquiries remain linked to the complete drive
IndustryParts prepares A5E01424398 requests with the host converter, board revision and connector evidence together.
- A5E identity retained
- Host equipment recorded
- Connector evidence reviewed
Recommended Models
| DNC-63-125-PPV-A-S6 | UV C 3Y-A1.1 | QAM22.2 |
| PT9541 | Siemens 6AV7885-5AK21-6GA1 | NUM ENTREES 0.6et8.E.24V |
| R57 DT71D8/BMG/HR/TF/IS | EVT013 | Siemens 1FK7103-5AF71-1EA0 |
| DSS02.2-W050-BE12-01-FW | MAC112C-0-HD-2-C/180-A-2/S029 224934 | OGS381 |
| 1PH6131-4NG49-Z | TXA204C | EMME-AS-80-S-LS-AM |
| ME4zrt | SND-L5083RP | Rittal SZ2418 |
| XP10BKB/DC XP10BKB | MAC093A-1-PS-4-C/110-A-0/WI594LV/S005 | X20AI4622 |
| DE4-BM4-1 00405986 | Moore 41N15 NULLMATIC | RP128KCLPILA |
| 6FX1111-1AA01 | IBS KBU 812 | MPM2400 |
| KS-BE-04.0-090-000-01-00 | ALFA2500BPB | EYL0001V0010L02J01 |
