Provides a traceable Siemens component identity for converter repair.
Technical Summary
A5E02822121 identifies a Siemens PCB supplied as part of a 690 V AC/AC converter. It is a component-level service number, so the parent converter article number and the board location must be captured before procurement.
The A5E identity should not be expanded into an unsupported PLC or communication-module description. Matching is performed from the physical label, converter documentation and connector layout.
Specifications
| Manufacturer | Siemens |
|---|---|
| Exact Model | A5E02822121 |
| Product Type | Converter printed-circuit board service part |
| Parent Equipment | Siemens 690 V AC/AC converter |
| Voltage Context | 690 V AC/AC |
| Procurement Identity | A5E service number |
| Selection Basis | Installed board label plus parent converter article number |
| Configuration Requirement | Preserve the parent converter parameter and firmware record |
| Installation Scope | Qualified board-level service inside the converter |
Features
Keeps the board tied to the 690 V AC/AC assembly instead of treating it as a generic controller.
Supports maintenance documentation where the parent converter and installed position are recorded.
Allows connector and artwork comparison before the cabinet is disturbed.
Compatibility
- Confirm A5E02822121 on the installed board and record every additional board revision or artwork marking.
- Identify the complete Siemens converter and power-stage article numbers before ordering.
- Compare mounting points, connectors, auxiliary supplies and related interface boards.
- Use only the Siemens service procedure applicable to the parent 690 V converter.
Replacement
- Save converter parameters, firmware, fault history and site wiring records.
- Isolate the mains and DC link, prove absence of voltage and apply ESD precautions.
- Photograph each plug and inspect adjacent power components for the initiating fault.
- Do not transfer programmable devices or jumpers unless the Siemens service instruction explicitly requires it.
- After installation, restore configuration and complete staged no-load and loaded functional checks.
FAQ
Why is the parent converter label required for A5E02822121?
A5E02822121 is a component service identity; the parent converter defines electrical, firmware and mechanical compatibility.
Can A5E02822121 be ordered from a photo of the front edge alone?
A complete enquiry should include both board sides where accessible, every label, connector layout and the converter nameplate.
What should be checked before energizing a replacement A5E02822121?
Check insulation, auxiliary supplies, power semiconductors, fans, connector seating and any fault path that could damage the board again.
Should devices be moved from the failed A5E02822121?
Only when a Siemens service document for the exact converter calls for the transfer; undocumented device swapping can change configuration or repeat damage.
What records close the replacement of A5E02822121?
Save the fitted board identity, converter firmware, parameter checksum, diagnostic log and results from staged functional testing.
About IndustryParts
https://www.industryparts.com/Converter PCB identity is controlled
IndustryParts keeps A5E02822121 connected to the parent converter record and the installed 690 V AC/AC board position.
- A5E code retained
- Parent converter identified
- Board label photographed
Recommended Models
| 4EM4911-7CB00 | RM/8026/M/600 | SF47 DRN80M4/BE1/TH |
| Honeywell EXB-1 | CK 58M | 7XV124.50-12 |
| PDLPC416-KNX | LUCA1XB 036389 | IC693ALG392B |
| Siemens 6DP1280-8AB | DESI20-K-DP 1070918397 | GT282 |
| 4WRE 10 EA75-22/G24K4/V | IFM ST2620 SCR14ABAFNKG | Lenze I55AE155F1AV10002S |
| X12110314-1ABS | 110-MA3-66-011-000 | 1PH7137-2QF02-0CJ0 |
| EP1008-0002 | NSYCR55WU2 | MX-9.14104.1.1.0 |
| P1900520442 | TA75DU-32 1SAZ321201R1002 | 6FX2001-2NB00 |
| TRIDONIC DALI PS2 28000876 | 6DS1720-8AA | TE500 |
| QSA224DC SCA068 | SDB-Tn10-20-1 | Euchner ZSA2A1G10A |
