Maintains the PSB11 board function within the specific installed SINAMICS power assembly.
Product Profile
A5E36228237 is used as a Siemens board-level service identity for a PSB11 Board / R3 SiC assembly. The complete A5E reference remains the procurement key.
Public Siemens documentation does not provide a complete standalone electrical specification for this service board. The installed SINAMICS equipment MLFB, board revision and connector arrangement therefore define the safe compatibility boundary.
No power, current or host-frame claim is inferred here from visually similar PSB11 boards or neighboring A5E references.
Technical Data
| Manufacturer | Siemens |
|---|---|
| Exact board reference | A5E36228237 |
| Board designation | PSB11 Board / R3 SiC |
| Product class | SINAMICS board-level service component |
| Compatibility basis | Complete board label, host MLFB, revision and Siemens service record |
| Values intentionally omitted | Standalone voltage/current ratings, host-frame list, firmware and substitute |
System Role
Supports controlled service exchange when the exact A5E and revision markings agree.
Requires connector and host documentation because board-level service identifiers are not generic catalog MLFBs.
Forms part of the drive power electronics and must be handled under the host isolation procedure.
About IndustryParts
https://www.industryparts.com/Board-level supply starts with host evidence
IndustryParts keeps A5E36228237 tied to its exact label and SINAMICS host instead of presenting uncertain board ratings as facts.
- R3 SiC marking requested
- Host identity captured
- Unsupported values omitted
Compatibility
- Match A5E36228237 exactly and verify the R3 SiC marking.
- Record the SINAMICS host MLFB, serial number and power-section identity.
- Compare connector keying, coating and all hardware revision marks.
- Use only a Siemens-approved cross-reference if the offered board number differs.
Applications
- Board-level maintenance of a SINAMICS assembly documented for A5E36228237.
- Repair or tested-spare evaluation with complete host and revision evidence.
- Planned replacement carried out under an approved drive-service and commissioning procedure.
FAQ
What must be provided to verify A5E36228237?
Provide both sides of the board label, R3 SiC marking, host SINAMICS MLFB and serial number, connector photos, failure symptoms and quantity.
Can another PSB11 board replace A5E36228237?
Only with a Siemens-approved cross-reference confirming the same host, hardware revision, electrical function, connectors and commissioning requirements.
Why does this page omit standalone voltage and current values?
The public manufacturer information does not expose a complete standalone specification for A5E36228237; copying ratings from another PSB11 board would create an unsafe assumption.
How should A5E36228237 be packed?
Use ESD shielding, connector protection, a rigid anti-flex enclosure and external traceability to the complete A5E and revision label.
What proves an A5E36228237 board change was successful?
Document exact identity, connector restoration, isolation and wiring checks required by the host manual, normal diagnostics and a controlled operating test.
Recommended Models
| UC2000-30GM-E6R2-V15 | 5PC600.SX01-00 | C-Bus2 L5504RVF |
| 1AV3164A 1LE1043-1DA49-0JB4-Z | 8US1213-4AQ03 | KT5G-2P1151 |
| LC-103X15-B7644 | ABB RXMVB2 RK 251 205-AN | LNL-500W |
| 3SB3210-2DA11 | ML7174E 2007 | Z 11154A |
| DV5-4-4-D0F | MA1578A | W40 1115-A2 DE-P0-056747 |
| avi-100 | GE 55-501463G002 | ABB DX111-FBP.0 1SAJ611000R0101 |
| HeatSystems 33479 | AW 50/75-3 | VW3A3601 |
| SPE/115211 RT/57232/M/80 | Niezgodka 70.2 SKK-CL | 2CDG110025R0011 |
| S8VK-T48024 | EWPC974 C-12V T1L2CWC312 | 6ES5926-3KA12 |
| E520 | G5.V3 | RI36-O/50AS.10TX-S |
