Siemens A5E36717813 IGD1 Trigger Interface Module
A Siemens SINAMICS G120 repair reference for an IGD1 trigger-interface module in the documented power class.
Technical Summary
A5E36717813 is a Siemens SINAMICS G120 service reference described as an IGD1 trigger-interface module. It is an internal power-stage repair component rather than a complete drive.
The exact host power module, semiconductor assembly, board revision, connectors and cooling arrangement must be confirmed before supply. Neighboring A5E references are not interchangeable by appearance.
Specifications
| Manufacturer | Siemens |
|---|---|
| Material Reference | A5E36717813 |
| Product Context | SINAMICS G120 |
| Module Designation | IGD1 |
| Service Description | Trigger interface module |
| AC Class | 480 V |
| DC-Link Class | 650 VDC |
| Current Class | 260 A |
| Siemens Description Suffix | TIM |
| Host Verification | Complete drive and power-module article |
| Assembly Verification | Board and semiconductor labels |
Features
- Provides the defined IGD1 trigger-interface function inside the matching SINAMICS power stage.
- Maintains the specified gate-control and feedback relationship for the associated semiconductor assembly.
- Supports qualified power-block repair when the complete host and hardware execution agree.
Compatibility
- Match the full SINAMICS G120 host and power-module article.
- Verify the semiconductor labels, connector positions and cooling construction.
- Confirm that the installed electrical class and IGD1 hardware revision agree with the replacement.
Replacement
- Diagnose surrounding power devices, supplies and feedback paths before installing the spare.
- Follow approved isolation, DC-link discharge, ESD and thermal-interface procedures.
- Complete insulation, gate-path, feedback, cooling and staged-load tests before return to service.
FAQ
Can A5E36717813 be selected from the G120 family name alone?
No. The complete power-module article, IGD1 board revision and semiconductor assembly are required for a defensible match.
What does the A5E36717813 supply scope include?
Confirm the quotation against the physical board and any attached power hardware; the reference identifies a repair component, not an entire converter.
Can another A5E36717xxx board replace A5E36717813?
Only a Siemens cross-reference or fully matched host and hardware documentation can establish interchangeability.
Which failure checks should precede an A5E36717813 exchange?
Inspect the power semiconductors, gate supplies, current feedback, DC link, cooling and evidence of short-circuit or thermal damage.
What information helps quote A5E36717813?
Send the drive and power-module nameplates, both board faces, semiconductor labels, connector layout, hardware revision and fault report.
What acceptance testing is appropriate after A5E36717813 installation?
Use the approved repair process to verify insulation, isolated gating, feedback, interlocks, cooling and operation under a controlled load.
Recommended Models
| L-TGM20-1 | CLM400 | WAF30 DRE80S4BE05/TF/ES7S |
| PZM2xA-A150-D03-00 | 520AOD01 1KGT024500R0001 | E84AVTCE1134SB0 |
| Grundfos CRE15-3 A-F-A-E-HQQE | AZM 170-02ZRK | 5PP520.0573-K04 |
| KF37 CM71M/BR/TF/RH1M/KK | AEM-24AT | AC.IS.3400000 |
| TFP-58P/160/3MM/3MM/MPU | 3WL9111-0BA22-0AA0 | DP255.501 |
| AEG b 400 TI 910-342-028 | 1PH6163-4CF06-ZZ:K09 | XJBO3-5928-1 |
| I5DAE240C10000000S | MS6-LFR-1/2-D7-C-R-V | DDI161 05-006-161 DKL011 |
| R20G06C/N | 215416 LS-K-KZ-4-12 | MI-DMMI |
| 9418/01-201-10 | CA10-A250 | XM30 X13651469-01 |
| MBMG2Z322263015 | Siemens C98043-A1052-L103 | ABB TU518-XC 1SAP411200R0001 |
