Siemens C98043-A7010-L1-5 SIMOREG DC-MASTER A7010-L1 Field Supply Module
A version-5 execution of the A7010-L1 field-supply module used with 15 A SIMOREG DC-MASTER converter hardware.
Key Information
C98043-A7010-L1-5 retains the complete C98043 board number, L1 hardware class and trailing version 5 shown on the submitted label. The A7010-L1 execution is used in the field-supply path of 15 A SIMOREG DC-MASTER converter hardware.
Siemens lists the A7010-L1 module with 15 A rated armature current, 3 A rated field current, and 0R1 values for both R1 and R2. These values distinguish it from the A7010-L2 execution used for the 30 A / 5 A class.
For module exchange, Siemens requires the item number to match through the L number. The trailing version can be handled within the documented exchange rule, but the replacement still requires field-current offset adjustment after installation.
Functions
Switch the field-supply path
The module forms the documented field-supply bridge for the matched SIMOREG converter class.
Separate L1 from L2 hardware
The L number identifies the current-class execution and must not be chosen from board-family appearance alone.
Carry the submitted board version
The trailing 5 remains part of the installed label and should be retained in the asset record even where exchange guidance permits another version.
Require post-exchange adjustment
A field-module replacement is followed by the specified field-current zero-point adjustment.
Specifications
| Manufacturer | Siemens | Exact model | C98043-A7010-L1-5 |
|---|---|---|---|
| Board family | C98043-A7010 | L number | L1 |
| Submitted version | 5 | Host platform | SIMOREG DC-MASTER / 6RA70 |
| Rated armature current class | 15 A | Rated field current | 3 A |
| R1 | 0R1 | R2 | 0R1 |
| Post-exchange action | Field-current offset adjustment with P051 = 22 | ||
About IndustryParts
https://www.industryparts.com/The L number and submitted execution stay visible
IndustryParts links the exact board label, converter identity and adjustment record so the proposed field module matches the installed SIMOREG current class.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
Installation
De-energize the converter
Remove all power from the SIMOREG inputs, outputs and electronics supply before module work.
Compare the complete identity
Match C98043-A7010 and L1, then record the submitted version and connector arrangement.
Preserve the host record
Archive the converter order number, parameters, module labels and field wiring before exchange.
Adjust and verify
Perform P051 = 22, confirm field-current zero and complete the approved converter tests.
Lifecycle
- L-number boundary
- Do not substitute A7010-L2 for this L1 execution; the documented current class is different.
- Version evidence
- Retain the trailing 5 in receiving and service records even though Siemens exchange guidance treats the version field separately.
- Acceptance evidence
- Store the completed offset adjustment and verified field-current behavior with the replacement record.
FAQ
Can C98043-A7010-L2 replace C98043-A7010-L1-5?
No. The L2 module belongs to the 30 A armature / 5 A field class, while this L1 execution is documented for 15 A / 3 A hardware.
Does the trailing 5 on C98043-A7010-L1-5 need to be supplied with the enquiry?
Yes. Retain the complete installed label for traceability even though Siemens exchange guidance allows version handling separately from the mandatory L-number match.
What host evidence should accompany C98043-A7010-L1-5?
Provide the complete 6RA70 converter order number, old board label, connector photographs, parameter archive and field-current records.
What adjustment follows a C98043-A7010-L1-5 exchange?
Perform the Siemens field-current offset adjustment using P051 = 22, then verify the resulting zero point and operating current.
What proves C98043-A7010-L1-5 is ready for service?
Correct L1 identity, secure connections, completed offset adjustment, stable field-current feedback and passed converter tests close the record.
Request a model-specific quotation
Send the complete C98043-A7010-L1-5 label, requested quantity, delivery destination and installed-system context.
