Siemens C98043-A7010-L2-5 SIMOREG DC-MASTER Field-Supply Board
The execution-state 5 marking of the C98043-A7010-L2 field-supply board for the documented 30 A SIMOREG device class.
Product Overview
C98043-A7010-L2-5 preserves the complete execution-state marking of the C98043-A7010-L2 field-supply power-section board.
Siemens service guidance treats the board identity through the L number as the primary compatibility boundary and requires field-current offset calibration after A7010 board replacement. The trailing 5 remains useful traceability evidence for the installed unit.
Performance
Retain execution evidence
Keeps the full -5 marking visible in inventory and maintenance records.
Restore field-current measurement
Requires the documented offset adjustment after the replacement is installed.
Protect host-unit traceability
Links the board to the 6RA70 MLFB, serial number and connection map.
Technical Details
| Manufacturer | Siemens | Exact model | C98043-A7010-L2-5 |
|---|---|---|---|
| Board family | C98043-A7010 | L-number | L2 |
| Execution state | 5 | Host platform | SIMOREG DC-MASTER / 6RA70 |
| Documented device class | 30 A armature / 5 A field | Post-exchange action | Field-current offset calibration |
System Integration
Freeze the record
Capture the full -5 label, host MLFB, serial number and diagnostics before isolation.
Verify the boundary
Match the replacement through the C98043-A7010-L2 identity.
Transfer connections
Restore every connector and conductor using the approved board-exchange procedure.
Calibrate and test
Complete the field-current offset adjustment before the controlled functional test.
Applications
Legacy DC-drive service
Maintaining a documented L2 field-supply execution in a 6RA70 installation.
Execution-state traceability
Recording the trailing -5 marking while applying the L-number compatibility rule.
Calibration-controlled exchange
Closing the board replacement with the required measurement offset adjustment.
FAQ
Q01Does the trailing 5 in C98043-A7010-L2-5 change the primary compatibility boundary?+
Siemens service guidance uses the board number through L2 as the key match; retain the trailing execution state for traceability.
Q02What should accompany a C98043-A7010-L2-5 enquiry?+
Provide the complete -5 label, host MLFB and serial, installed connectors, fault history and requested quantity.
Q03What calibration follows a C98043-A7010-L2-5 replacement?+
Perform the documented field-current offset adjustment before returning the drive to service.
Q04Can an A7010-L1 board replace C98043-A7010-L2-5?+
No. L1 and L2 identify different device and field-current classes, so the L number must match.
Q05What proves C98043-A7010-L2-5 is ready after service?+
Correct board identity, restored connections, completed offset calibration and a controlled field-current test provide acceptance evidence.
About IndustryParts
https://www.industryparts.com/Execution-state records remain visible through board service
IndustryParts keeps the full -5 label, host-unit identity, connection map and calibration requirement together for quotation review.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
Request a model-specific quotation
Send the complete C98043-A7010-L2-5 label, requested quantity, delivery destination and installed-system context.
