Vacon 70CVB01630E Inverter Control Board
A legacy Vacon inverter printed-circuit board identified by the complete board code for revision-controlled drive maintenance.
Overview
70CVB01630E is a Vacon inverter printed-circuit board used as a service component inside a compatible AC drive assembly. The board code must be matched exactly because connector layout, firmware and power-stage pairing can vary between drive revisions.
Selection should be based on the original board label and the complete host-drive nameplate rather than the visual appearance of the PCB.
Specs
| Manufacturer | Vacon |
|---|---|
| Board Code | 70CVB01630E |
| Product Category | Inverter printed-circuit board |
| System Role | Internal AC-drive electronics |
| Order Basis | Exact board and host-drive identification |
| Installation | Qualified service personnel inside a de-energized drive |
| Verification Items | PCB revision, connectors, firmware and host drive |
Features
- Board-level service identity for established Vacon frequency-converter installations.
- Revision-sensitive connectors and electronics that must remain matched to the host drive.
- Supports maintenance where the original drive architecture is retained instead of migrated.
- Exact board code provides a stronger selection reference than photographs alone.
Applications
- Repair of a documented Vacon AC drive after board-level diagnosis.
- Planned spare preparation for legacy variable-frequency-drive cabinets.
- Maintenance programs that preserve the installed motor, control wiring and drive parameter set.
Lifecycle
- Record the complete drive nameplate, PCB label and every connector position before removal.
- Discharge the DC link and follow the drive service procedure before handling the board.
- Preserve parameter and application backups held elsewhere in the drive system.
- Treat a different board suffix as incompatible until Vacon documentation confirms the substitution.
FAQ
Can 70CVB01630E be selected from a photograph alone?
No. Provide the PCB label and complete Vacon drive nameplate because visually similar boards may use different revisions.
What should be backed up before replacing 70CVB01630E?
Save the drive parameters, application settings and option-board configuration whenever the host drive permits it.
Is a nearby 70CVB code a direct replacement for 70CVB01630E?
Not without written compatibility confirmation for the exact drive hardware and firmware.
What installation precautions apply to 70CVB01630E?
Isolate power, wait for DC-link discharge, apply ESD controls and use qualified drive-service personnel.
Which details should accompany a 70CVB01630E enquiry?
Send the host-drive model, serial number, voltage class, board revision and clear connector-side photographs.
What must be checked after fitting 70CVB01630E?
Verify connector seating, option recognition, parameter integrity, fault status and controlled motor operation.
Recommended Models
| EPV-5000Q-PY-4 | 7DO720.7 | C04T8R00PB050M |
| 404D-22TA GR65434U084032K | T150 0T614X11 | XYTRONIX X-15s |
| 1734-IE2C + OB4 + IB8 | NW08N1 | DG60D 5D4XC0F01500 |
| DMV755 149037 | CT10.241 | PS120/240-AC85U |
| PCA/702063/M/200 | INT-1534-M-5-M-111 | 1746-IB32 SLC500 |
| AX345 AX34504A | IC200MDL750J | B74-KIT-BD007 |
| NS100L | M1000/3.0 100407 | BT815-W-12-I-BA1 |
| C3S025V2F11I20T30M00 | DNCB-63-320-PPV-A | Herion 0810100 |
| 1756-OB32 | G50AB045MHBR2C | ABB JA/S 4.230.1 GH Q631 0072 R0111 |
| 6SL3210-1KE17-5EF1 | DPIL/10 | ASK 1/EN |
