Yokogawa PH8ERP-05 KCl-Refillable pH Sensor, 5 m Cable Execution
A PH8ERP-family refillable pH sensor ordering execution in which the -05 field selects a 5 m integral cable.
Technical Summary
Yokogawa PH8ERP-05 belongs to the PH8ERP KCl-refillable pH sensor family. In the ordering code, the -05 field identifies the 5 m cable execution.
The submitted string does not state the later ordering selections used for the solution-ground tip, measuring system, style and optional construction. Those positions remain part of the final sensor identity and must be taken from the complete installed label.
For service work, preserve the electrode assembly, cable routing and analyzer connection as one documented measurement chain rather than treating cable length as the only selection point.
Specifications
Features
Refillable reference design
The PH8ERP family uses a refillable KCl reference arrangement for maintained pH measurement service.
Integral cable selection
The 05 ordering field fixes the sensor cable at 5 m and must remain visible in the enquiry record.
Configuration-controlled tip
Solution-ground and measuring-system choices belong to the full ordering string and cannot be assumed from the cable field.
Chain-based maintenance
Sensor, cable, holder and connected analyzer information are retained together for troubleshooting and replacement.
About IndustryParts
https://www.industryparts.com/Exact-model handling for PH8ERP-05
IndustryParts keeps the complete PH8ERP-05 identity, requested quantity and installed-system evidence together so the proposed supply can be checked against the actual application before dispatch.
Compatibility
Complete ordering code
Compare the full sensor label, not only PH8ERP-05, before approving an interchangeable assembly.
Mechanical installation
Record holder style, insertion geometry, seals and cable-entry route from the installed point.
Measurement loop
Confirm analyzer input, temperature-compensation arrangement and every connected lead from the loop documentation.
Replacement
Capture the installed identity
Photograph the entire label and record every ordering position that follows the 05 cable field.
Preserve the wet-end arrangement
Retain the approved holder, immersion or insertion geometry, seals and solution-ground construction.
Recommission the loop
Complete the required conditioning, calibration and process comparison before returning the pH point to control.
FAQ
Is PH8ERP-05 a complete ordering code for every installation?
Not necessarily. The 05 cable field is defined, but the full PH8ERP identity also uses later positions for the ground tip, measuring system, style and options. Supply the complete nameplate string.
What field evidence should accompany a PH8ERP-05 enquiry?
Provide clear sensor and analyzer labels, holder photographs, cable routing, process connection, temperature-compensation details and the current loop drawing.
Can a different PH8ERP cable length replace PH8ERP-05 without review?
No. Extra or reduced cable changes routing and termination conditions, and the remaining sensor construction must still match the installed measurement chain.
Which parts of the pH loop should be checked before removing PH8ERP-05?
Document the holder, seals, reference-electrolyte handling, solution-ground connection, analyzer terminals and any temperature element before isolation.
What closes a PH8ERP-05 replacement record?
Record the complete installed code, physical fit, leak inspection, stable calibration results and a credible process comparison after the sensor has conditioned.
