Beckhoff AM3073-0Q30-0000 AM3073 Q-Winding Synchronous Servomotor
A high-torque Beckhoff AM3000 synchronous servomotor for demanding closed-loop motion axes.
Overview
AM3073-0Q30-0000 belongs to the large-frame Beckhoff AM3000 permanent-magnet motor range. Its winding establishes a different electrical operating point from nearby variants, so selection must retain the complete type code.
Feedback, brake, shaft and connector execution remain suffix-dependent and must be confirmed from the nameplate.
Specs
| Manufacturer | Beckhoff Automation |
|---|---|
| Complete Model | AM3073-0Q30-0000 |
| Product Family | AM3000 synchronous servomotors |
| Motor Frame / Winding | AM3073 / Q |
| Stall Torque | 41.6 Nm |
| Stall Current | 24.6 A |
| Mechanical Maximum Speed | 6000 rpm |
| Rated Data at 400 V | 3000 rpm, 25.2 Nm, 7.92 kW |
| Rotor Inertia | 92 kg·cm² |
| Thermal Time Constant | 53 min |
| Permissible Radial Force at Shaft End | 1300 N |
| Permissible Axial Force | 500 N |
Features
- High-torque AM3073 frame for demanding closed-loop machine motion.
- Q winding provides the documented higher-speed 400 V operating point within the frame family.
- Permanent-magnet synchronous design supports precise servo control with the matched drive and feedback system.
- Full type-code control protects against changes in encoder, brake, shaft or connector execution.
Applications
- Heavy-duty positioning axes in production and material-handling machinery.
- Replacement of a documented AM3073 Q-winding motor in an established Beckhoff servo axis.
- Retrofit engineering where torque, inertia and mechanical envelope must remain close to the installed motor.
Lifecycle
- Record coupling alignment, machine load and connector orientation before removal.
- Save the complete drive configuration and motor feedback settings.
- Inspect the power and feedback cable sets for damage or contamination.
- Verify brake operation if fitted, then test the axis under controlled load.
FAQ
How is AM3073-0Q30-0000 different from an AM3073 M-winding motor?
The Q winding has a different current and speed operating point, so drive sizing and machine performance must be reviewed before substitution.
What should accompany an AM3073-0Q30-0000 spare request?
Send the complete nameplate, drive model, cable part numbers, brake status, shaft details and machine-axis duty.
Can the same servo parameters always be used after replacing AM3073-0Q30-0000?
Restore only the approved configuration, then verify feedback, motor data, current limits, tuning and safety functions during commissioning.
Why is rotor inertia important when assessing AM3073-0Q30-0000?
The motor and load inertia relationship affects acceleration, tuning and mechanical stress, so it belongs in a migration or substitute review.
What installation checks are important for AM3073-0Q30-0000?
Check lifting and handling, flange seating, coupling alignment, cable strain relief, connector orientation and cooling clearance.
Can a visually identical AM3073 replace AM3073-0Q30-0000?
Not without confirming the winding and every encoded mechanical and feedback option on the complete label.
Recommended Models
| UK35 BU 3008025 | CF10-50N | 6FM1 723-3AA10 |
| DGSL-10-80-PA | 6DP1920-8AA | 5T0001D000700F-000 |
| T6ERY0851R00C42A1+T6EY0853R00A1 | SEW HF 004-403 8257787 | SYS-7850 NSG-C |
| B&R 8BVI0014HWSS.000-1 | HTR-1002 | MUP110-1 054011 |
| GSB 1621-5620 | Honeywell XF821A | EDS-208A |
| Omron ZFX-C25 | ABB TA5141-RS232IW 1SAP187300B0201 | FLOE000010 |
| ASUTEC ASM-60-EW-08 | LS78/2SE | Siemens 6FC5357-0BB33-0AA1 6FC5247-0AA11-0AA3 |
| Siemens 6ES5 464-8MF21 | PME 04 404.070.01 | APS-412 |
| P-97910994-U | E84AVHCE3714SB0 | Dold BD9080.12/001 |
| CPR14-1200-ml09/R2 | 32.7600.107-00 | R47 DRE90L4 |
