Bently Nevada 330103-00-25-05-02-00 Proximity Probe
An M10×1, non-armored 3300 XL 8 mm probe with a 250 mm case and 0.5 m total probe length.
Product Overview
330103-00-25-05-02-00 is a Bently Nevada 3300 XL 8 mm proximity probe configured with an M10×1 thread, no unthreaded section, a 250 mm overall case and a 0.5 m total probe length.
The connector and approval suffixes are also part of the identity. The probe must be combined with the correct extension cable and Proximitor sensor to form the intended total system length.
Performance
- The standard 3300 XL 8 mm system provides a nominal scale factor of 7.87 V/mm (200 mV/mil).
- The system linear range is 2 mm (80 mil) when the complete matched components and target conditions are correct.
- The long 250 mm case supports installations where the sensing tip must reach through a substantial probe mounting path.
Technical Details
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Complete Model | 330103-00-25-05-02-00 |
| Product Family | 3300 XL 8 mm Proximity Transducer System |
| Probe Thread | M10 × 1 |
| Armor | Without armor |
| Unthreaded Length | 0 mm |
| Overall Case Length | 250 mm |
| Total Probe Length | 0.5 m |
| Connector | Miniature coaxial ClickLoc |
| Connector Protector | Not supplied |
| Approval Option | Approval not required |
| Nominal System Scale Factor | 7.87 V/mm (200 mV/mil) |
| Nominal Linear Range | 2 mm (80 mil) |
| Maximum Thread Engagement | 15 mm |
System Integration
- Use with the matching 3300 XL 8 mm extension cable and Proximitor sensor.
- Confirm the monitor input scale and measurement orientation.
- Check target material and mechanical runout during commissioning.
Applications
- Radial shaft vibration
- Axial position measurement
- Speed and phase reference points
FAQ
What does the 25 field mean in 330103-00-25-05-02-00?
It identifies a 250 mm overall case length, which must suit the probe mounting geometry.
What cable length is built into 330103-00-25-05-02-00?
The complete probe length is 0.5 m; the extension cable must be selected to achieve the intended total transducer-system length.
Does 330103-00-25-05-02-00 include cable armor?
No. The 330103 probe family is the M10×1 execution without armor.
Can 330103-00-25-05-02-00 be used with any Proximitor sensor?
Use the compatible 3300 XL 8 mm electronics and match the total system length and monitor scaling.
What mechanical check is critical for 330103-00-25-05-02-00?
Confirm the M10×1 mounting thread, maximum engagement, 250 mm case reach and clearance to the rotating target.
What should accompany a 330103-00-25-05-02-00 enquiry?
Send the complete probe, extension-cable and Proximitor labels plus mounting geometry and the required measurement type.
Recommended Models
| MGFAS2-DSM-SNI-B/ECR | PCI-733 190976C-04 | 82L25-103B800 |
| 8L501-101 | LI30-60D | 16DI ITEM3-2000U016000 |
| 1FT6064-1AF71-4EH1 | BWL000F 4040D-R011-S49 | 6ES5254-4UB21 |
| AFB3-6 14040137 | HD Link Pro 3D | 1TNE968902R2301 |
| USB32DVIPRO | PSD01-1501 1027906 | SLA-440-ALER |
| 6AG1055-1MB00-2XB1 | 24BS24AD4E | 4000-68522-4391001 |
| 30-60/48 | FMZ5000 904093 | 501MA |
| Rofin 101 115 550 | MOFH-3-1/8 | SVS-4-1/8 |
| apbt320 | 091447 | 3IF762.9 |
| Siemens 6ES5700-8FA11 | Alco XB 1019RW55-1B | 6SN1112-1AC01-0AA0 |
