Bently Nevada 330701-00-10-10-02-00 11 mm Proximity Probe
An unarmored 1/2-20 UNF 11 mm probe with a 1.0-inch case, 1.0 m lead and unprotected ClickLoc connector.
Product Identification
330701-00-10-10-02-00 is the short-case version in this batch of the Bently Nevada 3300 XL 11 mm probe family. It uses a 1/2-20 UNF unarmored body with zero unthreaded length.
Its remaining fields specify a 1.0-inch overall case, 1.0 m total probe length, standard cable with a ClickLoc connector without protector, and no agency approvals.
Engineering Data
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Model | 330701-00-10-10-02-00 |
| Probe Family | 3300 XL 11 mm |
| Thread | 1/2-20 UNF |
| Armor | Without armor |
| Unthreaded Length | 0.0 in |
| Overall Case Length | 1.0 in |
| Total Probe Length | 1.0 m |
| Connector / Cable | ClickLoc connector without protector, standard cable |
| Approval Option | Not required |
| Required System Components | Matching extension cable and 11 mm Proximitor Sensor |
Functions
- Provides non-contact shaft-relative vibration and position measurement.
- Uses a compact one-inch case where mounting depth is limited.
- Works as one calibrated element of the 3300 XL 11 mm transducer system.
- Supports machine-protection channels when installed and scaled as a complete loop.
Applications
- Tight 11 mm probe locations
- Radial vibration monitoring
- Thrust-position and shaft-observation channels
Lifecycle
- Keep the one-inch case code visible in inventory records to avoid mixing it with the two-inch variant.
- Store gap records and companion system identities with the spare.
- Inspect the unprotected connector environment during planned maintenance.
FAQ
How does 330701-00-10-10-02-00 differ from 330701-00-20-10-02-00?
The overall case is 1.0 inch rather than 2.0 inches, which changes mounting engagement and physical reach even though the lead and connector fields match.
Can 330701-00-10-10-02-00 be extended with any coaxial cable?
No. Use the matching Bently Nevada 11 mm extension cable and maintain the exact system length required by the Proximitor Sensor.
Does 330701-00-10-10-02-00 have connector protection?
No. Code 02 specifies the ClickLoc connector without protector, so the housing or installation must provide suitable protection.
What mechanical check matters most for 330701-00-10-10-02-00?
Confirm thread engagement, insertion range and connector clearance for the short case before accepting it as a replacement.
What records should accompany 330701-00-10-10-02-00?
Keep the mounting drawing, installed gap, extension-cable and Proximitor numbers, target material, scale and hazardous-area requirement.
