Bently Nevada 330901-00-24-10-11-05 3300 XL NSv 2.4 in Case-Length Proximity Probe
An unarmored 3300 XL NSv proximity probe with a 2.4 in case, 1.0 m FluidLoc cable, miniature ClickLoc connector and multiple approvals.
Product Identification
330901-00-24-10-11-05 is a 3300 XL NSv probe ordered with a 1/4-28 UNF thread and no probe armor. Its 00 field specifies 0.0 in of unthreaded length, while the 2.4 field identifies the 2.4 in overall case.
The 10 cable code provides 1.0 m of FluidLoc cable. Connector code 11 adds the miniature ClickLoc connector with protector, and approval code 05 completes the multiple-approval execution. These fields govern the mechanical fit and must remain together when a spare is selected.
The full 330901-00-24-10-11-05 ordering string preserves case geometry, cable length, connector protection and approval execution in one traceable record.
Engineering Data
- Manufacturer
- Bently Nevada
- Probe family
- 3300 XL NSv
- Probe thread
- 1/4-28 UNF
- Probe armor
- Without armor
- Unthreaded length
- 0.0 in
- Overall case length
- 2.4 in
- Total cable length
- 1.0 m
- Cable type
- FluidLoc
- Connector
- Miniature ClickLoc with protector
- Approval option
- Multiple Approvals
Functions
Observe shaft position
The probe forms the non-contact front end of the matched NSv eddy-current measurement chain.
Preserve mechanical reach
The 2.4 in case determines how the probe body fits the installed bracket or housing.
Carry the transducer signal
The 1.0 m FluidLoc lead terminates at the protected miniature ClickLoc connection.
Maintain ordering identity
The complete suffix keeps geometry, connection and approval data tied to the same spare.
Applications
Tight mechanical access
NSv probes suit machinery locations where the smaller probe format and exact case reach are required.
Oil-exposed routing
The FluidLoc cable execution supports installations where the published cable construction is specified.
Controlled replacement
The complete model is used when the original case length, lead and connector must be retained.
Lifecycle
Capture the installed chain
Photograph the probe, extension cable and Proximitor Sensor labels before disturbance.
Match the complete geometry
Verify 0.0 in unthreaded length, 2.4 in case and 1/4-28 UNF mounting.
Prove the measurement
Document gap, signal response and the approved alarm or trip test after service.
About IndustryParts
https://www.industryparts.com/Controlled handling for 330901-00-24-10-11-05
IndustryParts keeps the submitted 330901-00-24-10-11-05 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Suffix and MOD identity kept visible
- Mating hardware recorded before supply
- Acceptance evidence linked to the order
FAQ
What label evidence should accompany a 330901-00-24-10-11-05 enquiry?
Provide the complete probe, extension-cable and Proximitor Sensor labels, plus the mounting location and requested quantity.
Can a different 330901 case length replace 330901-00-24-10-11-05?
Not from family similarity alone. The 2.4 in case controls mechanical reach and must match the installed assembly.
Why does 330901-00-24-10-11-05 retain connector code 11?
Code 11 identifies the miniature ClickLoc connection, connector protector and FluidLoc cable execution.
Which field condition matters before removing 330901-00-24-10-11-05?
Record the running gap voltage, probe position, cable route and connector condition before the measurement chain is opened.
What closes the 330901-00-24-10-11-05 replacement record?
Document correct mechanical fit, stable gap and signal behavior, and completion of the approved machine-protection test.
