go on
Home>DCS>Emerson EPRO PR6423/005-110 Eddy Current Sensor

Hot Categories

Emerson EPRO PR6423/005-110 Eddy Current Sensor

Emerson EPRO PR6423/005-110 Eddy Current Sensor

Item NO.: 3797339
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameEmerson EPRO PR6423/005-110 Eddy Current Sensor
  • Item NO.3797339
  • Weight0.3000 kg = 0.6614 lb = 10.5822 oz
  • CategoryDCS
  • BrandEpro
  • Creation Time2026-10-16
8 MM EDDY CURRENT / 75 MM CASE / 5 M CABLE

Emerson EPRO PR6423/005-110 Eddy Current Sensor

An M10 × 1 PR6423 sensor configured with a 75 mm case, 5.0 m cable, Lemo end and no adapter plug.

ManufacturerEmerson EPRO
Exact modelPR6423/005-110
Product type8 mm Eddy Current Sensor
01

Overview

PR6423/005-110 is an 8 mm eddy-current sensor for non-contact displacement and position measurement on conductive machine targets.

Its ordering code identifies the /00 M10 × 1 unarmored base, case-length code 5 for a 75 mm case, adapter option 1 without an adapter plug, cable code 1 for 5.0 m and end code 0 for a Lemo connector.

The sensor must remain paired with the documented converter and monitor scaling; nearby PR6423 suffixes can differ in case length, cable construction and connection.

02

Specifications

ManufacturerEmerson EPRO
Exact modelPR6423/005-110
Sensor familyPR6423
Measurement principleEddy current, non-contact
Nominal tip size8 mm
Body threadM10 × 1
Case length75 mm
Cable armorWithout armor
Adapter plugWithout adapter plug
Integral cable length5.0 m
Cable terminationLemo connector
Operating temperature-35 to +180 °C
Short-duration temperatureUp to +200 °C
Storage temperature-40 to +70 °C
Sensor-head pressure resistanceUp to 10,000 hPa
Vibration resistance5 g at 60 Hz and 25 °C
Measurement-chain requirementUse the applicable CON converter and monitor configuration
03

Features

01

The 75 mm case code defines the mechanical reach for the installed holder.

02

A fixed 5.0 m lead makes system-length verification part of the spare review.

03

The Lemo termination supports the documented plug-in converter path.

04

The model-specific suffix prevents a visually similar PR6423 variant from being accepted without comparison.

04

Applications

  • Relative shaft displacement and vibration channels on turbomachinery.
  • Position or gap measurement with a compatible PR6423 converter chain.
  • Like-for-like maintenance where the 75 mm case and 5.0 m lead are required.
05

Lifecycle

  • Measure or confirm the installed case length and holder depth before ordering.
  • Record the converter, monitor channel and system-length requirement.
  • Route the unarmored cable away from abrasion, heat and unsupported bends.
  • Commission the full channel by checking gap, scaling, response and protection outputs.
06

FAQ

Q01What distinguishes PR6423/005-110 from PR6423/00R-010?

This model uses a 75 mm standard case and no adapter plug; the other code identifies a reverse-mount construction with a different adapter option.

Q02Why must the case length be verified for PR6423/005-110?

Case length controls the installed reach and adjustment range, so a different PR6423 body can fit the thread yet fail to reach the required gap.

Q03Can PR6423/005-110 be connected without a converter review?

No. Verify the CON converter, total chain configuration, monitor input and channel scaling before installation.

Q04What photographs are useful for a PR6423/005-110 quotation?

Include the full sensor label, exposed case, holder, Lemo connector, cable route, converter label and monitor-channel identification.

Q05How should PR6423/005-110 be validated after replacement?

Check mounting security, cable condition, static gap, signal linearity over the required movement and every configured alarm or trip.

You May Also Like