Measures shaft displacement without mechanical contact.
Key Information
EZ1080-10-00-010 belongs to Emerson’s AMS EZ 1000 eddy-current measurement chain for non-contact shaft displacement and vibration measurement.
The order code resolves to an 8 mm tip, M10x1 case thread, 100 mm case length, 0 mm unthreaded length and a 1.0 m integral cable.
Emerson specifies a standard 2 mm (80 mil) measuring range for the EZ108x sensor family. The sensor is oil-proof and uses a Lemo connector.
Functions
Uses the configurable AMS EZ 1000 converter and field-calibration workflow.
Supports extension-cable selection for the documented short integral-cable options.
Keeps mechanical length and cable length explicit in one order code.
Specifications
| Manufacturer | Emerson AMS |
|---|---|
| Exact model | EZ1080-10-00-010 |
| System family | AMS EZ 1000 |
| Sensor type | Eddy-current proximity sensor |
| Tip diameter | 8 mm |
| Standard measuring range | 2 mm (80 mil) |
| Case thread | M10x1 |
| Case length | 100 mm |
| Unthreaded length | 0 mm |
| Integral cable length | 1.0 m |
| Cable armor | None |
| Connector | Lemo |
| Sensor construction | Oil-proof |
| Measurement chain | Sensor, compatible cable arrangement and configured EZ1000 converter |
| Compliance context | AMS EZ 1000 system is designed for API 670 eddy-current measurement requirements |
Installation
- Confirm target material, required total system length, converter configuration and physical probe clearance.
- Use the correct M10x1 mounting hardware and maintain the manufacturer’s installation clearances.
- Route the 1.0 m cable away from damage and electrical interference without exceeding its bend limits.
- Calibrate the complete sensor, cable and converter chain before protection or monitoring service.
Lifecycle
- Store the probe with its cap and connector protected from impact and contamination.
- Keep the converter setup and field-calibration record with the machine asset file.
- Do not mix EZ1080-10-00-010 with a reverse-mount or different cable-length order code.
- Repeat the approved gap and calibration checks after any chain component is changed.
About IndustryParts
https://www.industryparts.com/Every character in the sensor order code matters
IndustryParts keeps EZ1080-10-00-010 tied to its 100 mm case, zero unthreaded length and 1.0 m cable so the supplied probe matches the installed chain.
- Mechanical code decoded
- Cable chain reviewed
- Calibration evidence retained
Related Models
| VAA-4E4A-KE5-ZEJQ/E2L | 4WEH 16 D72/6EG24N9K4 R900923989 + 4WE 6 D62/EG24N9K4 | WF20 DRN71M4/MM05 |
| DRQD-50-90-YSRJ-A-AL-FW | Conzerv EM6400 | BR 0 200 CL250 2A FP0 |
| SLX4 H5 518-542MHz | 0285-0135 | CZ-V21AP |
| RF3332 | KJ3242X1-BA1 12P2471X042 | I/O 56a |
| 3NE9622-1C | TL 500 | EL3681 |
| GiSmbH TS-A80 | ABB T3N250 | A9MEM3335 |
| PR502 | B&R X20DI9371 | Siemens 6SL3710-1GE36-1AA3-Z |
| ABB PSTB840-690-70 1SFA895019R7000 | 84-330001-001 | LV429120 NSX100-250 3P3DMA100 |
| CBD6SP00020A-109 | MG5-40C | X20BB67 |
| 09.56.080-4008 | EA89 | Siemens 6ES5415-7AB21 |
FAQ
Q01What must be supplied to quote EZ1080-10-00-010 correctly?
Provide the complete EZ1080-10-00-010 code, converter model and firmware, extension-cable code, target material, required system length and quantity.
Q02Can an installed legacy proximity chain accept EZ1080-10-00-010 directly?
Compatibility depends on the converter, cable chain, target material and calibration. Confirm the complete measurement chain rather than matching tip diameter alone.
Q03What should be checked on receipt of EZ1080-10-00-010?
Inspect the 8 mm tip, M10x1 threads, 100 mm case, connector and 1.0 m cable; confirm the label and protect the assembly from ESD and impact.
Q04How should the old probe position be preserved for EZ1080-10-00-010?
Record the installed gap, bracket position, thread engagement and cable route before removal. Re-establish the gap with approved test equipment.
Q05What proves EZ1080-10-00-010 is ready for operation?
A complete chain calibration, correct gap voltage, stable response, verified alarm path and documented machine run check provide the acceptance evidence.
