Emerson IC695ETM001-LAAA PACSystems RX3i Ethernet Interface Module
An RX3i Ethernet interface identified by the complete LAAA release and installed controller-network record.
Key Information
IC695ETM001-LAAA is an RX3i Ethernet Interface Module. Emerson identifies the base IC695ETM001 as a two-port Ethernet interface for PACSystems RX3i.
The LAAA suffix is retained as part of the exact hardware identity; this page does not assign a firmware level or feature solely from the suffix. Those details belong to the installed label and approved release documentation.
Selection requires the controller model, rack slot, network topology, IP configuration, firmware and Machine Edition project.
Functions
Attach the controller to Ethernet
Provides the approved Ethernet interface between the RX3i controller and configured network services.
Support two physical connections
Uses the module’s two network ports in the documented topology.
Expose diagnostics
Makes interface and network status available to the controller project and maintenance record.
Preserve release identity
Keeps LAAA hardware evidence attached to the network configuration.
Specifications
| Manufacturer | Emerson / GE Fanuc | Exact model | IC695ETM001-LAAA |
|---|---|---|---|
| Base catalog | IC695ETM001 | Product family | PACSystems RX3i |
| Product type | Ethernet Interface Module | Network ports | Two |
| Selection boundary | Exact LAAA label and installed firmware | Engineering evidence | Machine Edition project and Ethernet configuration |
| Topology evidence | Port map, IP settings and connected devices | ||
Installation
Record the network
Export IP settings, port use, connected devices, switch paths and controller communications.
Capture the release
Photograph the complete LAAA label and record the installed firmware before removal.
Restore carefully
Install only under the approved RX3i hardware and software procedure, then restore the validated configuration.
Verify communications
Test every controller, HMI, supervisory and peer path that depends on the interface.
Lifecycle
- Configuration custody
- Store the network configuration with the controller project and LAAA hardware identity.
- Address control
- Reserve the approved IP parameters and device record during an exchange.
- Fault evidence
- Retain port status, controller diagnostics and switch observations when investigating an outage.
FAQ
Q01What should accompany a IC695ETM001-LAAA enquiry?+
Provide the complete LAAA label, installed firmware, controller model, rack slot, Machine Edition project, IP settings and port topology.
Q02Can another IC695ETM001 revision replace IC695ETM001-LAAA by base number alone?+
No. Hardware and firmware compatibility must be checked against the installed controller and project.
Q03How many physical network ports are associated with the IC695ETM001 base module?+
Emerson documents two network ports; their actual use must follow the approved topology.
Q04What should be captured before disconnecting IC695ETM001-LAAA?+
Record both cable destinations, switch ports, IP parameters, network services and live diagnostics.
Q05What proves IC695ETM001-LAAA is operating correctly after service?+
Stable module diagnostics and successful tests of every configured controller, HMI and peer communication path provide acceptance evidence.
About IndustryParts
https://www.industryparts.com/Network identity is handled as configuration-controlled data
IndustryParts keeps the LAAA label, firmware record, topology and requested quantity together before supply.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
Related Models
Request a model-specific quotation
Send the complete IC695ETM001-LAAA label, requested quantity, delivery destination and installed-system context.
