SINAMICS G120 | Filtered 37 kW low-overload stage
Siemens 6SL3210-1PE27-5AL0 SINAMICS G120 PM240-2 Power Module
A frame-size FSD PM240-2 power module with Class A filtering and an integrated braking chopper.
BrandSiemens
Model6SL3210-1PE27-5AL0
Product TypeFiltered Modular Drive Power Module
01
Product Identification
6SL3210-1PE27-5AL0 is a filtered SINAMICS G120 PM240-2 power stage for three-phase 380 to 480 V systems. It uses the FSD enclosure and requires a compatible Control Unit.
The complete AL0 suffix identifies the Class A filtered configuration. The unit is rated for 37 kW low-overload duty or 30 kW high-overload duty.
02
Engineering Data
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3210-1PE27-5AL0 |
| Product Family | SINAMICS G120 PM240-2 |
| Input Supply | 3 AC 380-480 V, +10 / -20%, 47-63 Hz |
| Low-Overload Rating | 37 kW; 150% for 3 s and 110% for 57 s |
| High-Overload Rating | 30 kW; 200% for 3 s and 150% for 57 s |
| Input Filter | Integrated Class A filter |
| Braking Chopper | Integrated |
| Frame Size | FSD |
| Protection | IP20 without Control Unit or panel |
| Operating Temperature | -20 to +40 °C (LO); -20 to +50 °C (HO) |
| Cooling Air Requirement | 0.055 m³/s |
| Control-Unit Release | Firmware V4.7 HF8 or later |
| Lifecycle | Active product |
03
Functions
- Converts the three-phase line supply into controlled motor power under the fitted Control Unit.
- Provides the documented 37 kW low-overload and 30 kW high-overload operating profiles.
- Integrates Class A filtering for this AL0 article.
- Switches regenerative energy to a correctly selected external braking resistor through the built-in chopper.
- Uses internal forced-air cooling to manage the FSD power stage.
04
Applications
- Modular SINAMICS G120 drives for pumps, fans and conveyors selected on low-overload duty.
- Machinery with higher acceleration or torque demand selected on the 30 kW high-overload rating.
- Installations that require the integrated Class A filtered PM240-2 configuration.
- Systems requiring controlled dynamic braking through an external resistor.
- Service replacement where the FSD mechanics and AL0 suffix must be preserved.
05
Lifecycle
- Siemens lists the article as an active product.
- Retain the complete 6SL3210-1PE27-5AL0 code because the filter suffix is part of the engineering identity.
- Store the Control Unit parameter backup and motor data independently from the power-stage hardware.
- For a future exchange, compare power, current, frame, filter, braking and firmware requirements together.
- Use the approved PM240-2 installation and commissioning procedure after replacement.
