Emerson IC695PNC001-AK PACSystems RX3i PROFINET Controller Module
An RX3i PROFINET controller retained by its AK hardware identity, controller project and installed device topology.
Product Overview
IC695PNC001-AK is the AK release of the IC695PNC001 RX3i PROFINET Controller. The complete suffix remains part of spare control.
Emerson identifies the base module as an RX3i PROFINET controller. Exact release and firmware support must be checked against the installed CPU and PAC Machine Edition project.
Before exchange, preserve the PROFINET device names, IP addressing, topology, update settings, module order and controller diagnostics.
Performance
Control the PROFINET network
Coordinates configured devices from the RX3i controller project.
Maintain device identity
Uses the approved names, addresses and topology assignments stored in the engineering record.
Expose network diagnostics
Provides device and communication status for commissioning and fault isolation.
Technical Details
| Manufacturer | Emerson / GE Fanuc | Exact model | IC695PNC001-AK |
|---|---|---|---|
| Base catalog | IC695PNC001 | Product family | PACSystems RX3i |
| Product role | PROFINET Controller | Hardware identity | AK suffix retained |
| Required project evidence | PAC Machine Edition hardware and network configuration | Required network evidence | Device names, IP settings and topology |
| Compatibility boundary | Installed CPU, firmware and supported software release | ||
System Integration
Export the network
Save the PROFINET configuration, device names, addresses, topology and diagnostics.
Photograph the identity
Capture the full AK label, slot, port connections and cable destinations.
Restore the approved project
Install only after CPU, firmware and software compatibility are confirmed.
Prove every device
Verify configured stations, alarms, controller data exchange and any redundancy path.
Applications
Distributed RX3i I/O
Controlling approved PROFINET devices from a PACSystems RX3i station.
Network expansion
Adding engineered devices under the supported controller and project limits.
Controlled module exchange
Restoring a documented PROFINET controller without changing the approved device identity plan.
FAQ
Q01What should accompany a IC695PNC001-AK quotation request?+
Provide the AK label, installed firmware, RX3i CPU model, Machine Edition project, network topology and requested quantity.
Q02Can another IC695PNC001 suffix replace IC695PNC001-AK automatically?+
No. The hardware release, firmware, CPU and software support must be reviewed together.
Q03Which PROFINET records should be saved before removing IC695PNC001-AK?+
Export device names, IP settings, topology, update configuration, module order and live diagnostics.
Q04What cable evidence matters for IC695PNC001-AK?+
Photograph both port assignments, switch destinations, shield condition and the installed network path.
Q05What proves IC695PNC001-AK is ready after service?+
Every configured device must be reachable with clean diagnostics and verified controller data exchange.
About IndustryParts
https://www.industryparts.com/PROFINET spares are checked against the complete topology
IndustryParts records the AK release, controller pairing, firmware and network project before supply.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
Related Models
Request a model-specific quotation
Send the complete IC695PNC001-AK label, requested quantity, delivery destination and installed-system context.
