go on
Home>DCS>Honeywell CC-TCNT01 C300 Controller IOTA

Hot Categories

Honeywell CC-TCNT01 C300 Controller IOTA

Honeywell CC-TCNT01 C300 Controller IOTA

Item NO.: CC-TCNT01
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameHoneywell CC-TCNT01 C300 Controller IOTA
  • Item NO.CC-TCNT01
  • Weight0.0000 kg = 0.0000 lb = 0.0000 oz
  • CategoryDCS
  • BrandHoneywell
  • Creation Time2026-08-18
  • Series C termination and mounting assembly for the Experion PKS C300 controller platform.
Honeywell Industrial Automation

Honeywell CC-TCNT01 C300 Controller IOTA

Series C termination and mounting assembly for the Experion PKS C300 controller platform.

Technical Summary

Honeywell CC-TCNT01 is the Input Output Termination Assembly used as the physical mounting, power and communication interface for a Series C C300 controller.

The assembly places the controller connection, Fault Tolerant Ethernet interfaces, I/O Link interfaces and device-index facilities in the cabinet mounting area. Controller processing and CEE execution are provided by the installed CC-PCNT controller module.

Correct engineering requires the IOTA, controller revision, redundancy cable, FTE network and I/O Link design to be checked as one system before installation or replacement.

Specifications

Model CC-TCNT01
Product form C300 Controller IOTA
Nominal form factor 6-inch Series C assembly
Compatible controller family CC-PCNT01 and CC-PCNT02 C300 controllers
Supervisory network Fault Tolerant Ethernet through the installed controller
I/O Link interfaces Two
Supported controller I/O Link rates 375 kbaud PM I/O Link or 750 kbaud Series C I/O Link, subject to controller configuration
Device index range 1 to 510
Redundancy arrangement Two controller/IOTA assemblies with a dedicated redundancy cable
Controller time sources SNTP and PTPv2
Series family Experion PKS Series C
Installation environment Industrial control cabinet
Series C internal ambient limit 0 to 60 °C
Transportation and storage limit -40 to 85 °C
Relative humidity 5 to 95%, non-condensing
Enclosure classification IP20 / NEMA 1 when installed as specified

Features

  • Dedicated mounting and termination platform for the C300 controller.
  • Provides the physical interfaces used for dual FTE connectivity.
  • Provides two controller I/O Link connections.
  • Supports non-redundant or redundant C300 system architecture.
  • Uses device-index settings for deterministic node identification.
  • Supports Removal and Insertion Under Power practices for the installed Series C electronics when the documented procedure is followed.
  • Series C mechanical design supports vertical installation and managed cabinet heat flow.

Compatibility

  • Use with the approved CC-PCNT controller revision and firmware for the Experion release.
  • A redundant controller pair requires two IOTAs and the approved redundancy cable.
  • Validate FTE A and FTE B paths independently before placing the controller in service.
  • Confirm each I/O Link type and rate before connecting Series C or supported remote I/O.
  • Match power, grounding and cabinet layout to the Series C platform specification.

Replacement & Lifecycle

CC-TCNT01 is a system-specific C300 IOTA and should be replaced by exact model and revision unless Honeywell project documentation authorizes another assembly.

Replacing an IOTA does not replace the C300 controller configuration. Preserve the controller database, device index, network assignments and redundancy relationship.

For lifecycle work, verify the installed CC-PCNT controller generation and the supported Experion release before ordering hardware.

Applications

  • C300 controller mounting in Experion PKS cabinets.
  • Redundant C300 controller pairs.
  • Local Series C I/O Link architectures.
  • C300 integration with approved PM I/O or remote I/O configurations.
  • Brownfield controller maintenance and cabinet refurbishment.

FAQ

Q1. Is CC-TCNT01 the C300 processor?
No. It is the controller IOTA. The CC-PCNT module provides controller processing and mounts on the IOTA.
Q2. Can it be used in a redundant C300 pair?
Yes. Redundancy uses two controller/IOTA assemblies and the specified redundancy cable.
Q3. How many I/O Links are available?
The C300 architecture provides two physical I/O Links through the controller IOTA.
Q4. What should be checked before replacement?
Check the controller model, Experion release, device index, FTE wiring, I/O Link configuration, power and redundancy cable.
Q5. Does the IOTA store the control strategy?
No. Control strategy execution and controller memory belong to the installed C300 controller module.
Q6. Can wiring be transferred without verification?
No. Label and verify every FTE, I/O Link, power, ground and redundancy connection against the project drawings.

Product Enquiry

For availability, revision matching and quantity support, contact the IndustryParts sales team with the exact model and installed system revision.

Email: sales@mvme.cn    WhatsApp: +86 18030175807

You May Also Like