Siemens 6ES7288-5AQ01-0AA0 SB AQ01 Single-Channel Analog Output Board
A compact signal board providing one configurable voltage or current analog output.
Product Profile
PROFILESiemens 6ES7288-5AQ01-0AA0 is the SIMATIC S7-200 SMART SB AQ01 signal board with one analog output selectable for voltage or current operation.
The documented output ranges are −10 to +10 V or 0–20 mA. Diagnostics include overflow/underflow, short to ground in voltage mode and wire break in current mode.
The field receiver, load, functional earth, AQ0/AQ0M terminals, scaling and CPU project configuration must match the selected operating mode.
Technical Data
DATASystem Role
SYSTEMCompatibility
MATCHArchive
Save output mode, command scaling, receiver impedance, terminal map, functional earth and CPU project.
Wire
Verify AQ0/AQ0M polarity, shield/earth arrangement and permitted load before enabling the channel.
Prove
Check minimum, midpoint and maximum commands plus the applicable wire-break or short-to-ground diagnostic.
Applications
APPLICATIONAnalog setpoint output
Providing one documented voltage or current command to a compatible receiving device.
Compact actuator reference
Adding a single process or machine analog output without a larger expansion module.
Controlled board replacement
Restoring the exact mode, scaling, load and diagnostics after an AQ01 exchange.
About IndustryParts
https://www.industryparts.com/Exact-model handling for 6ES7288-5AQ01-0AA0
IndustryParts prepares this sb aq01 single-channel analog output board enquiry with the complete label, requested quantity and installed-system evidence kept together, so the proposed supply can be compared with the actual application before dispatch.
FAQ
QUESTIONSQ01Can 6ES7288-5AQ01-0AA0 be used as an analog input?
No. 6ES7288-5AQ01-0AA0 is a single analog output board; use the specified input hardware for measurements.
Q02Which diagnostics depend on the 6ES7288-5AQ01-0AA0 output mode?
Short to ground applies in voltage mode, while wire break applies in current mode.
Q03What wiring details should accompany a 6ES7288-5AQ01-0AA0 enquiry?
Provide AQ0/AQ0M terminal photographs, functional-earth connection, output mode, receiver load, scaling and CPU identity.
Q04Can the receiver be changed without reviewing 6ES7288-5AQ01-0AA0?
No. Confirm the new receiver input type, impedance, range, grounding and configured scaling.
Q05What proves 6ES7288-5AQ01-0AA0 is commissioned correctly?
Document stable low, midpoint and high outputs at the receiver plus correct mode-specific diagnostics and final project checksum.
