Siemens 6ES7292-1AH30-0XA0 SIMATIC S7-1200 Eight-Terminal Tin-Plated Connector Block Set
A Siemens spare connector-block package containing four eight-terminal tin-plated blocks for designated S7-1200 hardware.
Technical Summary
PRODUCT CONTEXT6ES7292-1AH30-0XA0 is the Siemens SIMATIC S7-1200 spare Connector Block with eight terminals and tin-plated contacts. Siemens lists the article as a four-piece package within the S7-1200 accessory range.
The eight-terminal construction distinguishes it from the seven-, ten-, eleven- and twelve-terminal blocks in the same family. Selection should follow the host module article number rather than enclosure width or color.
Specifications
CONTROLLED DATASpare connector block
8 per block
Tin-plated
4 blocks
SIMATIC S7-1200
Complete article number required
Different pole counts use different MLFBs
Host module and terminal numbering should be retained
Features
FUNCTIONAL DISTINCTIONSFour-piece maintenance pack
The order unit provides four matching eight-terminal blocks for controlled spare handling.
Tin-plated contact system
The published contact finish is retained in the exact ordering identity.
Clear pole-count boundary
Eight terminal positions make this article distinct from adjacent S7-1200 connector-block sizes.
Transfer-friendly format
A numbered conductor map can be created before removing the original block.
Compatibility
SELECTION BOUNDARIESHost module
Verify the complete SIMATIC S7-1200 host MLFB and its published connector requirement.
Pole count and keying
Do not force an eight-terminal block into hardware assigned to another terminal count or encoded layout.
Conductor preparation
Confirm wire size, ferrule practice, identification and field isolation before transfer.
Replacement
SERVICE WORKFLOWIdentify
Photograph the host module and original connector block and record all eight terminal positions.
Move
Isolate the field circuits and transfer conductors position-for-position without changing shields or commoning.
Verify
Inspect retention and continuity and compare controller point states with the approved I/O schedule.
FAQ
CUSTOMER DECISION SUPPORTHow many terminals are on each 6ES7292-1AH30-0XA0 block?
Siemens identifies eight terminals per connector block.
What is included under one 6ES7292-1AH30-0XA0 article?
The manufacturer product overview lists a four-piece package.
Can 6ES7292-1AH30-0XA0 replace the seven-terminal block?
No. Terminal count and host-module assignment differ, so the exact Siemens accessory table must be followed.
What information should accompany a 6ES7292-1AH30-0XA0 enquiry?
Provide the host MLFB, connector photographs, eight-point wiring schedule and required package quantity.
What should be checked after fitting 6ES7292-1AH30-0XA0?
Confirm conductor retention, correct terminal numbering, continuity and the expected input or output state at the controller.
About IndustryParts
https://www.industryparts.com/Controlled handling for 6ES7292-1AH30-0XA0
IndustryParts keeps the submitted 6ES7292-1AH30-0XA0 identity, requested quantity and installed-system evidence together so a proposed supply can be checked before dispatch.
- Complete submitted model retained
- Installed-system evidence reviewed
- Quotation record kept with the enquiry
