Home>PLC>Siemens 6ES7407-0RA02-0AA0 SIMATIC S7-400 PS 407 20 A Power Supply

Hot Categories

Siemens 6ES7407-0RA02-0AA0 SIMATIC S7-400 PS 407 20 A Power Supply

Siemens 6ES7407-0RA02-0AA0 SIMATIC S7-400 PS 407 20 A Power Supply

Item NO.: 3746876

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameSiemens 6ES7407-0RA02-0AA0 SIMATIC S7-400 PS 407 20 A Power Supply
  • Item NO.3746876
  • Weight1.3000 kg = 2.8660 lb = 45.8562 oz
  • CategoryPLC
  • BrandSiemens
  • Creation Time2026-08-25
  • SIMATIC S7-400 PS 407 20 A Power Supply
Siemens 6ES7407-0RA02-0AA0 SIMATIC S7-400 PS 407 20 A Power Supply

Siemens 6ES7407-0RA02-0AA0 SIMATIC S7-400 PS 407 20 A Power Supply

ManufacturerSiemensModel6ES7407-0RA02-0AA0Product TypeSIMATIC S7-400 PS 407 wide-range power supply

01Overview

Siemens 6ES7407-0RA02-0AA0 is the PS 407 wide-range power supply for SIMATIC S7-400 racks. It accepts 120/230 V AC or DC sources across the documented input ranges and delivers 5.1 V DC at 20 A to the S7-400 backplane plus a short-circuit-protected 24 V DC output at 1 A. The module includes monitoring and power-failure buffering for the automation system, making input selection, rack load and backup arrangements critical engineering checks.

Configuration ControlVerify the complete article number, installed rack, power, interfaces, software, wiring and lifecycle requirement before ordering.

02Specs

Manufacturer Siemens
Article Number 6ES7407-0RA02-0AA0
Product Designation PS 407 20 A
Automation System SIMATIC S7-400
Rated Input 120/230 V AC or DC
Permissible AC Input 85 to 264 V AC
Permissible DC Input 88 to 300 V DC
Line Frequency 50/60 Hz; permissible 47 to 63 Hz
Backplane Output 5.1 V DC, 20 A
Auxiliary Output 24 V DC, 1 A
Output Protection Short-circuit protected
Power-Failure Buffering More than 20 ms
Typical Active Power Input 158 W
Typical Power Loss 35 W
Commercial Status Active product

03Features

Key Functions

  • Wide-range AC or DC input supports the documented S7-400 supply arrangements.
  • The 5.1 V DC, 20 A output powers the rack backplane without a required base load.
  • A separate 24 V DC, 1 A output supports the documented auxiliary use and is idle-proof.
  • Short-circuit protection is provided for both output circuits.
  • Power-failure buffering exceeds 20 ms under the documented conditions and follows the NAMUR NE21 requirement.
  • Status monitoring supports rapid diagnosis of supply and backup conditions.

Product Identity

  • Manufacturer: Siemens
  • Model: 6ES7407-0RA02-0AA0
  • Product Type: SIMATIC S7-400 PS 407 wide-range power supply
  • Status: Active product

04Applications

  • Powering higher-load SIMATIC S7-400 rack configurations within the approved current budget.
  • Control cabinets with either AC or DC sources inside the permitted wide-range input window.
  • Service replacement of an existing PS 407 20 A module with the same electrical design.
  • S7-400 stations requiring the additional 24 V DC auxiliary output.
  • Automation systems that rely on the documented short power-failure hold-up.
  • Engineered redundant or backup arrangements using supported S7-400 hardware and wiring.

05Lifecycle

  • Siemens identifies the exact PS 407 article as an active product.
  • Calculate the complete rack current demand before selecting the 20 A power supply.
  • Verify AC or DC input type, voltage range, protective devices, grounding and conductor sizing.
  • Review the installed backup-battery arrangement and maintenance procedure without assuming battery details from another PS 407 variant.
  • After replacement, check both outputs, rack startup, current loading, alarms, buffering and all CPU diagnostics.

06FAQ

What is Siemens 6ES7407-0RA02-0AA0?

It is the PS 407 wide-range 20 A power supply for SIMATIC S7-400 racks.

Can the module use either AC or DC input?

Yes. It accepts the documented 120/230 V AC or DC ratings within the specified permissible voltage ranges.

What is the main backplane output?

The module supplies 5.1 V DC at up to 20 A to the S7-400 backplane.

Is a 24 V output available?

Yes. A short-circuit-protected 24 V DC output rated at 1 A is provided.

How long is the documented power-failure hold-up?

The official technical data specifies more than 20 ms under the applicable operating conditions.

What must be checked after exchange?

Verify input selection, protective wiring, 5.1 V and 24 V outputs, rack load, alarms, buffering and CPU startup diagnostics.

You May Also Like