Siemens 6SE7022-6TC84-1HF3 PEU Power Output Module
A SIMOVERT MASTERDRIVES PEU power-output spare specified for the 25.5 A, 510–620 V DC device class.
Product Identification
Siemens 6SE7022-6TC84-1HF3 is the PEU power output module listed for SIMOVERT MASTERDRIVES devices rated 25.5 A on a 510–620 V DC link.
The complete MLFB identifies a spare module rather than a complete converter. Compatibility must be established from the host converter nameplate, control variant, hardware release, power connections and cooling arrangement.
During service, preserve the host parameter record and treat the PEU as part of the converter power path. Isolation, stored-energy discharge and approved drive procedures govern the exchange.
Engineering Data
Siemens
6SE7022-6TC84-1HF3
SIMOVERT MASTERDRIVES
PEU power output module
25.5 A
510–620 V DC
Spare module, not a complete converter
Host converter MLFB and module label
Power connections, control links and cooling path
Functions
Power-stage service assembly
Provides the documented PEU output-module execution for the matched MASTERDRIVES device class.
Controlled energy path
Forms part of the converter power section and must be handled under stored-energy and isolation procedures.
Host-specific replacement
Uses the converter nameplate and installed module execution to prevent substitution by current rating alone.
Thermal integration
Operates within the converter cooling and temperature-protection arrangement.
Applications
Legacy drive repair
Exact-module replacement in an installed SIMOVERT MASTERDRIVES converter.
Planned spare control
Label-matched inventory for the documented 25.5 A, 510–620 V DC device population.
Power-path recovery
Service after diagnosis has isolated the fault to the approved PEU assembly.
Lifecycle
Record 6SE7022-6TC84-1HF3, host MLFB, hardware release, DC-link rating, connectors, buswork and cooling hardware.
Discharge and isolate the converter, then transfer the matched PEU using the Siemens service procedure.
Verify insulation, connection torque, cooling, precharge, DC-link behavior and a controlled motor test.
About IndustryParts
https://www.industryparts.com/Traceable handling for 6SE7022-6TC84-1HF3
IndustryParts keeps the submitted 6SE7022-6TC84-1HF3 identity, requested quantity and installed-system evidence together so the proposed supply can be checked before dispatch.
Suffix and release kept visible
Installed role documented
Dispatch check tied to the enquiry
FAQ
What electrical class is documented for 6SE7022-6TC84-1HF3?
Siemens identifies the PEU spare for 25.5 A devices operating from a 510–620 V DC link.
Is 6SE7022-6TC84-1HF3 a complete MASTERDRIVES converter?
No. It is a power output module supplied as a spare for a compatible host device.
What should accompany a 6SE7022-6TC84-1HF3 enquiry?
Provide the full converter nameplate, module labels, hardware release, DC-link rating, control type, cooling arrangement and connection photographs.
Can another 25.5 A PEU replace 6SE7022-6TC84-1HF3 automatically?
No. The complete MLFB, voltage class, mechanical execution, control links and host converter must all match.
What acceptance checks follow a 6SE7022-6TC84-1HF3 exchange?
Complete the approved insulation, bus connection, precharge, cooling, DC-link, motor-direction and loaded-drive tests.
