Siemens 6SE7038-6GL84-1BG0 IVI Inverter Interface Board
The IVI inverter-interface spare documented at component position A20 in compatible SIMOVERT MASTERDRIVES chassis units.
Product Identification
Siemens 6SE7038-6GL84-1BG0 is the IVI inverter interface board identified as component A20 in SIMOVERT MASTERDRIVES chassis documentation.
The spare-parts tables associate this IVI execution with defined HF, HG and HH inverter hardware. The complete host MLFB and installed power-unit design remain the compatibility boundary.
Interface-board replacement must preserve plug locations, ribbon and internal connections, board release, control hardware and the converter parameter record.
Engineering Data
Siemens
6SE7038-6GL84-1BG0
SIMOVERT MASTERDRIVES
IVI
A20
Inverter interface board
Compatible HF, HG and HH chassis executions
Spare electronic board
Complete host converter MLFB and installed board label
Functions
Inverter interface role
Provides the documented IVI interface assembly within the compatible chassis converter.
Internal signal coordination
Connects the host inverter hardware through its defined plugs and board position.
Chassis-family matching
Selection follows the applicable HF, HG or HH hardware record rather than visual similarity.
Service traceability
The complete 6SE7038-6GL84-1BG0 code and board release remain linked to the converter maintenance file.
Applications
Chassis inverter maintenance
Exact IVI replacement after converter diagnosis identifies the interface board.
Controlled legacy spare
Inventory matched to a named MASTERDRIVES host and board release.
Repair verification
Bench or installed-system assessment using the approved converter documentation.
Lifecycle
Record 6SE7038-6GL84-1BG0, A20 position, host MLFB, board revision, every plug and the current parameter archive.
Use ESD precautions, verify connector keying and install only the matched IVI execution.
Check power-up diagnostics, interface signals, feedback, communications, direction and the controlled load test.
About IndustryParts
https://www.industryparts.com/Traceable handling for 6SE7038-6GL84-1BG0
IndustryParts keeps the submitted 6SE7038-6GL84-1BG0 identity, requested quantity and installed-system evidence together so the proposed supply can be checked before dispatch.
Suffix and release kept visible
Installed role documented
Dispatch check tied to the enquiry
FAQ
What board designation belongs to 6SE7038-6GL84-1BG0?
Siemens identifies it as the IVI inverter interface board at component position A20.
Which host information matters for 6SE7038-6GL84-1BG0?
Provide the complete MASTERDRIVES MLFB, chassis execution, power section, control board, IVI release and connector photographs.
Can another IVI board replace 6SE7038-6GL84-1BG0 by appearance?
No. Host hardware group, MLFB, board release, connector map and internal interface must all be checked.
What should be preserved before removing 6SE7038-6GL84-1BG0?
Archive parameters and faults, photograph every plug, mark ribbon-cable orientation and record the installed option boards.
How should a replacement 6SE7038-6GL84-1BG0 be tested?
Verify board recognition, clean diagnostics, feedback plausibility, communications, motor direction and a monitored functional run.
