Siemens 6SL3000-0BE21-6AA0 SINAMICS S120 Wideband Line Filter
Wideband 380-480 V line filter engineered for the SINAMICS S120 16 kW Active Line Module.
ManufacturerSiemensModel6SL3000-0BE21-6AA0Product TypeSINAMICS S120 wideband line filter for 16 kW Active Line Module
01Product Identification
Siemens 6SL3000-0BE21-6AA0 is a SINAMICS S120 wideband line filter for the 16 kW Active Line Module. It is rated for 380 to 480 V three-phase systems, 47 to 63 Hz and 30 A, with approximately 170 W power loss. Wideband and basic line filters are not interchangeable labels: the connected line module, controller filter setting, network conditions and prescribed commissioning procedure must match the exact filter type.
Configuration ControlVerify the full article number, nameplate, electrical design, interfaces, software, wiring and lifecycle requirement before ordering.
02Engineering Data
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3000-0BE21-6AA0 |
| Product Family | SINAMICS S120 |
| Product Type | Wideband line filter |
| Compatible Line Module | 16 kW Active Line Module |
| Input Voltage | 380 to 480 V AC, 3-phase |
| Voltage Tolerance | +10% / -10%; -15% for less than 1 minute |
| Line Frequency | 47 to 63 Hz |
| Rated Current | 30 A |
| Power Loss | 170 W |
| Lifecycle | Cancelled product; spare part |
03Functions
Operational Functions
- Attenuates line-side interference across a broad frequency range in the documented S120 configuration.
- Is assigned to the 16 kW SINAMICS S120 Active Line Module.
- Handles 30 A rated current on 380 to 480 V three-phase networks.
- Supports an engineered EMC installation when used with prescribed wiring, grounding and shield practices.
- Requires the controller parameter setting that corresponds to the selected filter type.
- Works as part of the line connection rather than as a standalone power-conversion device.
Identification
- Manufacturer: Siemens
- Model: 6SL3000-0BE21-6AA0
- Product Type: SINAMICS S120 wideband line filter for 16 kW Active Line Module
- Status: Cancelled product; spare part
04Applications
Use Cases
- SINAMICS S120 systems using a 16 kW Active Line Module and specified wideband filtering.
- Machine cabinets that require the exact 6SL3000-0BE21-6AA0 line-side component.
- Maintenance replacement where cable routing, grounding and filter setting are retained.
- Drive retrofits that preserve the documented line-module and filter pairing.
- EMC-sensitive industrial installations engineered to Siemens S120 guidance.
Compatibility Boundary
- Use with the documented 16 kW Active Line Module and the exact wideband-filter configuration.
- Confirm line voltage, frequency, rated current, upstream protection and conductor sizing.
- Set the drive or controller parameter for the correct filter type before running identification.
- Perform line-supply and DC-link identification where required by the Siemens commissioning instructions.
- Maintain short, low-inductance grounding and the prescribed shield and cable routing.
- Do not substitute 6SL3000-0BE21-6DA0 merely because both articles serve a 16 kW-class system.
05Lifecycle
- Siemens identifies 6SL3000-0BE21-6AA0 as a cancelled spare-part article.
- Confirm current spare-part availability and the exact supported migration path before planning a retrofit.
- Record the connected line-module article, filter parameters, network data and physical installation.
- A different filter requires electrical, EMC, parameter and commissioning review.
- After replacement, verify precharge, line current, DC-link identification, fault-free operation and EMC performance.
