Siemens 6SL3040-1MA01-0AA0 CU320-2 PN Control Unit
An active CU320-2 PN control unit for SINAMICS S120 multi-axis systems, supplied without its required CompactFlash card.
Key Information
key informationSiemens 6SL3040-1MA01-0AA0 is the SINAMICS S120 CU320-2 PN control unit for coordinating modular multi-axis drive systems over PROFINET. It provides the central control, topology and commissioning functions for connected SINAMICS components.
The article is supplied without a CompactFlash card. Firmware, licenses and the approved drive project therefore remain separate controlled items and must match the installed system.
Replacement planning should retain the full PROFINET configuration, DRIVE-CLiQ topology, option-module assignment and machine safety validation rather than treating the control unit as a blank plug-in spare.
Functions
functionsCentral drive coordination
Runs the control and coordination tasks for the configured SINAMICS S120 drive topology.
PROFINET integration
Connects the drive system to the plant automation network through the PN execution.
DRIVE-CLiQ management
Identifies and exchanges data with compatible drive components across four DRIVE-CLiQ interfaces.
About IndustryParts
https://www.industryparts.com/Exact-model support for 6SL3040-1MA01-0AA0
IndustryParts keeps the complete 6SL3040-1MA01-0AA0 identity, requested quantity and installed-system evidence together so the proposed supply can be compared with the actual application before dispatch.
Specifications
specificationsInstallation
installationArchive the drive project, firmware, licenses and PROFINET identity.
Record every DRIVE-CLiQ node, option board, I/O assignment and safety function.
Select the correct CompactFlash card separately.
Restore the approved topology and network settings before enabling the axes.
Compare actual and configured DRIVE-CLiQ topologies.
Complete axis, network, diagnostic and machine-safety acceptance tests.
Lifecycle
lifecycleActive identity
Siemens lists the exact article as an active CU320-2 product.
Card dependency
The bare control unit does not include the CompactFlash card needed for the system execution.
Migration control
Hardware generation, firmware, power modules and project requirements must be reviewed together.
FAQ
faqDoes 6SL3040-1MA01-0AA0 include its CompactFlash card?
No. Siemens lists 6SL3040-1MA01-0AA0 without the CompactFlash card, so the correct card, firmware and licenses must be selected separately.
What project evidence should accompany a 6SL3040-1MA01-0AA0 enquiry?
Provide firmware, CompactFlash identity, PROFINET name and addressing, DRIVE-CLiQ topology, option boards and configured axes.
Can 6SL3040-1MA01-0AA0 replace the original CU320 without engineering review?
No. The CU320-2 generation, card, firmware and connected-component compatibility must be checked before migration.
What is the main network boundary for 6SL3040-1MA01-0AA0?
It is the PN execution; preserve the approved PROFINET device identity, controller relationship and network diagnostics.
What proves 6SL3040-1MA01-0AA0 is ready after replacement?
Confirm the restored project, all DRIVE-CLiQ nodes, PROFINET communication, axis operation, diagnostics and machine safety functions.
