go on
Home>PLC>Siemens 6SL3120-1TE23-0AD0 SINAMICS S120 30 A D-Type Motor Module

Hot Categories

Siemens 6SL3120-1TE23-0AD0 SINAMICS S120 30 A D-Type Motor Module

Siemens 6SL3120-1TE23-0AD0 SINAMICS S120 30 A D-Type Motor Module

Item NO.: 3749698
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameSiemens 6SL3120-1TE23-0AD0 SINAMICS S120 30 A D-Type Motor Module
  • Item NO.3749698
  • Weight7.9000 kg = 17.4165 lb = 278.6643 oz
  • CategoryPLC
  • BrandSiemens
  • Creation Time2026-08-28
  • SINAMICS S120 30 A D-Type Motor Module
Siemens 6SL3120-1TE23-0AD0 SINAMICS S120 30 A D-Type Motor Module
SINAMICS S120 | Booksize Motor Module

Siemens 6SL3120-1TE23-0AD0 SINAMICS S120 30 A D-Type Motor Module

Active 30 A D-type inverter module with 90 A peak output for high-dynamic S120 axes.

ManufacturerSiemensModel6SL3120-1TE23-0AD0Product TypeSINAMICS S120 booksize D-type Single Motor Module

01Overview

Siemens 6SL3120-1TE23-0AD0 is the 30 A booksize D-type Single Motor Module for SINAMICS S120. It converts the common DC link into a controlled three-phase motor output and provides a threefold 90 A peak-current value. The module combines internal air cooling, optimized pulse patterns, extended Safety Integrated support and DRIVE-CLiQ communication in a 100 mm-wide housing. It is the higher-overload counterpart to the 30 A C-type article, so selection must follow the axis duty profile rather than the continuous-current value alone.

Exact-Model CheckVerify the full suffix, current profile, hardware generation, terminals, firmware, drive project and safety configuration before ordering.

02Specs

Manufacturer Siemens
Article Number 6SL3120-1TE23-0AD0
Product Family SINAMICS S120
Construction Booksize D-type, internal air cooling
DC Link / Electronics Supply 510 to 720 V DC / 24 V DC
Rated / Base-Load Current 30.0 A / 25.5 A
S6 / Peak Current 40.0 A / 90.0 A
Type Rating at IN / IH 16.0 kW / 13.7 kW
Rated Pulse Frequency 4 kHz
DC-Link Current / Capacitance 36.0 A / 705 µF
Motor Cable Length 100 m shielded; 150 m unshielded
Cooling-Air Requirement 0.015 m³/s
Power Loss, Typical / Maximum 0.26 kW / 0.31 kW
Safety Integrated SIL 2; PL d; Category 3

03Features

Product Functions

  • Supplies one motor axis from the modular S120 DC link.
  • Provides 90 A peak current, three times the 30 A rated value.
  • Supports 40 A S6 current for the documented 40 percent duty.
  • Uses optimized pulse patterns at a 4 kHz rated pulse frequency.
  • Supports extended Safety Integrated functions in a validated drive architecture.
  • Includes DRIVE-CLiQ connectivity for component recognition and control.

Identification

  • Manufacturer: Siemens
  • Model: 6SL3120-1TE23-0AD0
  • Product Type: SINAMICS S120 booksize D-type Single Motor Module
  • Status: Active product

04Applications

  • Dynamic axes whose acceleration or short-duration torque demand requires up to 90 A.
  • Modular drive groups using a shared 510 to 720 V DC link.
  • Machine axes with long motor cables within the specified 100 m shielded limit.
  • Modernization of older 30 A booksize positions after connector and firmware checks.
  • Cabinet installations designed for a 100 mm IP20 motor module and forced-air cooling.

05Lifecycle

  • Siemens lists this exact D-type article as an active product.
  • It is the current 30 A threefold-overload option in the booksize C/D range.
  • The C-type 6SL3120-1TE23-0AC0 is not equivalent where more than 56 A peak current is required.
  • Older AA-series cable connections may require the official adapter-cable solution.
  • After exchange, validate current limits, motor data, feedback, braking and all Safety Integrated functions.

06FAQ

What distinguishes 6SL3120-1TE23-0AD0 from the 30 A C-type article?

The D-type module provides 90 A peak current, while the C-type 6SL3120-1TE23-0AC0 is documented at 56 A.

Which continuous and intermittent currents apply to this D-type module?

The official data sheet lists 30.0 A rated current, 25.5 A base-load current and 40.0 A S6 current at 40 percent duty.

How long may the motor cable be?

Siemens specifies up to 100 m shielded or 150 m unshielded.

What cabinet space is required for the 0AD0 module?

The module is 100 mm wide, 380 mm high and 270 mm deep, with IP20 / UL open-type protection.

Which safety performance is documented?

Safety Integrated capability is listed to SIL 2, PL d and Category 3 when engineered within the supported system.

Is this exact 30 A D-type article still active?

Yes. Siemens lists 6SL3120-1TE23-0AD0 as an active product.

You May Also Like