go on
Home>PLC>Siemens 6SL3210-1PE12-3AL1 SINAMICS PM240-2 Power Module

Hot Categories

Siemens 6SL3210-1PE12-3AL1 SINAMICS PM240-2 Power Module

Siemens 6SL3210-1PE12-3AL1 SINAMICS PM240-2 Power Module

Item NO.: 3745139
Inquiry

Warranty: 1 year 


Condition : brand new in factory sealed box


Email: sales@mvme.cn


Chat online: +86 18030175807

Detail

  • Product NameSiemens 6SL3210-1PE12-3AL1 SINAMICS PM240-2 Power Module
  • Item NO.3745139
  • Weight1.5500 kg = 3.4172 lb = 54.6746 oz
  • CategoryPLC
  • BrandSiemens
  • Creation Time2026-08-24
  • SINAMICS PM240-2 with Class A Filter
Siemens 6SL3210-1PE12-3AL1 SINAMICS PM240-2 Power Module

Siemens 6SL3210-1PE12-3AL1 SINAMICS PM240-2 Power Module


ManufacturerSiemensModel6SL3210-1PE12-3AL1Product TypeSINAMICS PM240-2 with Class A Filter

01Product Identification

Siemens 6SL3210-1PE12-3AL1 is a SINAMICS PM240-2 Power Module for three-phase 380-480 V AC systems. The FSA module includes an integrated Class A filter and braking chopper, is rated 0.55 kW for high-overload duty and 0.75 kW for low-overload duty, and is supplied without a Control Unit or operator panel.

Configuration ControlVerify the complete article number, electrical rating, installed system, firmware, communication, wiring, safety requirements and mechanical fit before ordering.

02Engineering Data

Manufacturer Siemens
Article Number 6SL3210-1PE12-3AL1
Product Family SINAMICS PM240-2
Input Supply Three-phase 380-480 V AC, +/-10%, 47-63 Hz
High-Overload Power 0.55 kW
High-Overload Duty 200% for 3 s, 150% for 57 s, 100% for 240 s
Low-Overload Power 0.75 kW
Low-Overload Duty 150% for 3 s, 110% for 57 s, 100% for 240 s
EMC Filter Integrated Class A filter
Braking Chopper Integrated
Frame Size FSA
Operating Temperature -10 to +50 degrees C high overload; -10 to +40 degrees C low overload
Degree of Protection IP20
Control Unit Not included
Operator Panel Not included
Control-Unit Firmware Release V4.6 or later

03Functions

Operational Functions

  • Integrated Class A filtering supports the defined EMC installation category.
  • The built-in braking chopper permits connection of the correctly selected braking resistor.
  • Separate high-overload and low-overload ratings support duty-based selection.
  • The modular PM240-2 architecture is completed with an approved SINAMICS Control Unit.
  • Internal diagnostics and control depend on the selected Control Unit and commissioned parameter set.
  • The compact FSA frame supports cabinet installation with the prescribed airflow and clearances.

Product Identity

  • Manufacturer: Siemens
  • Model: 6SL3210-1PE12-3AL1
  • Product Type: SINAMICS PM240-2 with Class A Filter

04System Integration

  • Select an approved SINAMICS Control Unit with firmware V4.6 or later for the exact drive configuration.
  • Confirm the Class A filter is suitable for the installation category and cable-length requirements.
  • Match the motor, braking resistor, mains protection, line components, grounding, EMC layout and cabinet cooling.
  • An operator panel is not included and must be selected separately if local operation is required.
  • Do not compare only by 0.55 kW or 0.75 kW; overload duty, filter, frame, supply and Control Unit compatibility are equally important.

05Applications

Typical Uses

  • Compact variable-speed drives requiring a filtered PM240-2.
  • Pumps, fans, conveyors, mixers and machine axes within the documented overload class.
  • Applications using an external braking resistor through the integrated braking chopper.
  • Maintenance replacement in modular SINAMICS G120 configurations.

Selection Boundary

  • Choose the correct overload rating for the actual duty cycle.
  • Confirm Class A filter, braking resistor and cable requirements.
  • Match the Control Unit, firmware, motor, frame and cabinet design.

06Lifecycle

  • Confirm the current Siemens lifecycle and service status when ordering the exact article.
  • Back up the Control Unit parameter set and record the Power Module identification before exchange.
  • Document motor data, overload duty, switching frequency, braking resistor, line components, EMC arrangement and cooling.
  • A different PM240-2 suffix can change filter, voltage, power, frame or regional approval and is not automatically interchangeable.
  • After replacement, verify DC-link behavior, motor current, direction, braking, EMC, alarms, overload performance and temperature.

FAQFrequently Asked Questions

What is Siemens 6SL3210-1PE12-3AL1?

It is a SINAMICS PM240-2 Power Module with an integrated Class A filter and braking chopper.

What power ratings apply?

The module is rated 0.55 kW for high-overload duty and 0.75 kW for low-overload duty.

Is a Control Unit included?

No. Siemens specifies the Power Module without a Control Unit and without an operator panel.

Which firmware release is required?

The product record states that the module is released for Control Unit firmware V4.6 or later.

Does the module include a braking resistor?

No. It includes the braking chopper; the correctly rated braking resistor and its installation must be selected separately.

What should be tested after replacement?

Verify motor current, direction, DC-link behavior, braking, parameter set, alarms, overload performance, EMC and temperature.

You May Also Like