6SL3210-1SE23-2AA0 is a Siemens SINAMICS S120 PM340 Power Module for three-phase 380 to 480 V systems. It provides 32 A rated output current and 15 kW rated motor power in a FSC blocksize enclosure.

The 6SL3210-1SE23-2AA0 configuration is a filtered AA0 version. Its 11 kW high-overload rating, 52 A maximum output current and external braking-resistor connection distinguish the exact power-stage selection.

• Delivers 32 A rated output current with 37.1 A for S6 duty at 40% and 52 A maximum output current.
• Integrated line filter in the AA0 version must be preserved when matching the installed cabinet design.
• Internal air cooling requires 54.9 l/s while the documented sound pressure remains below 60 dB(A).
• The PM340 braking circuit supports an external resistor greater than 56 ω with a maximum 15 m connection cable.
• The FSC mechanical format separates 6SL3210-1SE23-2AA0 from adjacent PM340 current ratings.

• medium-power single-axis drives.
• Machines requiring 11 kW high-overload motor sizing and a 27 A base-current profile.
• Modular SINAMICS S120 single-axis drive systems controlled by a compatible Control Unit.
• Retrofit work where the installed cabinet is engineered for the FSC PM340 format and the AA0 filtered variant.

• Retain the full 6SL3210-1SE23-2AA0 order number because the final suffix identifies the filtered AA0 construction.
• Confirm current Siemens spare-part availability and any migration recommendation before replacing this legacy PM340 order number.
• Match 15 kW, 32 A, FSC, line-filter status and braking-resistor requirements rather than selecting only by motor power.
• Back up the Control Unit parameter set and record motor, line reactor, protection and EMC details before exchanging the power stage.
• Recommission the drive and verify motor direction, current limits, braking behavior and protective functions after replacement.