Siemens A5E36717791 Drive Electronics Service Board
A board-level Siemens service reference requiring exact host-drive and hardware-revision verification.
Overview
A5E36717791 is a Siemens board-level service identifier. Public model-specific engineering data is limited, so the page keeps the identity exact and does not assign undocumented electrical ratings or connector functions.
The installed assembly label, host drive and visible revision must therefore control quotation and replacement. Similar A5E references must not be treated as interchangeable.
Specs
| Manufacturer | Siemens |
|---|---|
| Board Reference | A5E36717791 |
| Component Class | Drive electronics service board |
| Identity Basis | Complete PCB and assembly marking |
| Host Equipment | Confirm from installed drive nameplate |
| Hardware Revision | Confirm from physical board label |
| Electrical Ratings | Use host documentation; not inferred from reference |
| Supply Verification | Photographs and connector map required |
Features
- Provides a traceable Siemens service identity for the installed electronic assembly.
- Allows the physical board marking to be compared during repair-part selection.
- Supports revision-controlled maintenance when paired with the complete host equipment record.
Applications
- Exact-board replacement in a documented Siemens drive cabinet.
- Repair evaluation where the removed assembly remains available for comparison.
- Maintenance planning based on the original equipment bill of materials.
Lifecycle
- Handle the assembly using appropriate electrostatic precautions.
- Preserve connector labels and jumper or switch positions before removal.
- Do not discard the original board until the repaired system passes testing.
- Record the fitted revision and diagnostic result in the drive history.
FAQ
Why are electrical ratings omitted for A5E36717791?
The exact public reference does not uniquely support those values, so the host documentation and physical label must be used.
What identifies a valid A5E36717791 replacement?
Match the complete PCB marking, assembly revision, connector population, mounting points and documented host drive.
Can a similar A5E board number replace A5E36717791?
No substitution should be assumed from visual similarity or a nearby material number; use an explicit Siemens cross-reference.
What evidence should accompany a A5E36717791 enquiry?
Provide front and rear photographs, every sticker, host nameplate, connector map, fault report and quantity.
What precautions apply when changing A5E36717791?
Follow the drive discharge procedure, use ESD controls and label each internal connection before removal.
How should A5E36717791 be validated after installation?
Complete visual, insulation and connector checks, then run host diagnostics and a controlled functional test before production release.
Recommended Models
| BMXXBP1200 | CC-PAOH01 51405039-175 | X20 PD 0011 Rev.F0 |
| 3RT2028-2AP00 | B30C-1125-855-WT Y3800686 | 6ES7392-1AM00-0AA0 |
| BSM 80A-275AAX-707 | Allen-Bradley 25-RF033-DL | Eberle DS-41 051455000100 |
| 18-06-66-00/p | ABB ACS800-07-760-5 | 3RH1911-1FA40 |
| WAGO 790-108 | AGM-204-500 | WAGO 2002-2409 |
| R37 R17 DRN71M4/TH | 3RV1991-1BA0 | Siemens 6SE7033-5HK60-Z |
| AX5801 | ADNM-40-A-P-A-20Z1-35Z2 | 1KGT004700R5011 |
| A094811.0001B | BZMD1-A63 | EE32 |
| ABB ACS580-01-144A-2 | 6RA2277-6GS22-0 | X20 AT 4222 |
| EX310 | BMXDRA1605 | ABB, M3JP 160MLA 4 IMB3/IM1001 EX |
