Siemens C98043-A1680-L1 SIMOVERT MASTERDRIVES CUR Control Electronics Module
The base board identity for the CUR electronics used in SIMOVERT MASTERDRIVES rectifier and regenerative-feedback units.
Product Profile
C98043-A1680-L1 is the Siemens base identifier for the CUR control electronics module used in SIMOVERT MASTERDRIVES rectifier and rectifier/regenerative-feedback units. Siemens service instructions show the same CUR electronics supplied under spare MLFB 6SE7090-0XX85-1DA0.
Installed labels normally extend the base reference with a hardware suffix such as -06 or -07. That suffix and the EPROM or software version affect option compatibility, so the complete physical label must accompany C98043-A1680-L1.
Technical Data
| Manufacturer | Siemens |
|---|---|
| Base Board Reference | C98043-A1680-L1 |
| Module Name | CUR control electronics module |
| Host Platform | SIMOVERT MASTERDRIVES |
| Host Function | Rectifier and rectifier/regenerative-feedback control |
| Related Spare MLFB | 6SE7090-0XX85-1DA0 |
| Hardware Revision | Additional suffix after L1 must be captured from the installed label |
| Software Evidence | EPROM or software version must be recorded separately |
| Option-Compatibility Example | Siemens instructions tie some CUR options to minimum hardware and software versions |
| Selection Evidence | Full C98043 label, host MLFB, software identity and option-board list |
| Handling | Stored-energy isolation and ESD control |
| Acceptance | Diagnostics, interfaces, permissives and controlled converter operation |
System Role
Provides the CUR closed-loop and open-loop electronics in the matched converter unit.
Carries hardware-revision information beyond the C98043-A1680-L1 base code.
Works with separately identified software and optional interface boards.
Supports service traceability between board reference and Siemens spare MLFB.
Compatibility
- Capture the entire C98043-A1680-L1-xx label rather than the base code alone.
- Confirm the host infeed or regenerative-unit MLFB, serial number and rated current.
- Record the EPROM or software version and every installed option board.
- Use Siemens service documentation to confirm minimum CUR hardware and software versions for each option.
Applications
- CUR electronics replacement in a documented SIMOVERT MASTERDRIVES converter.
- Board-level identification where C98043 labeling is clearer than the spare MLFB.
- Legacy maintenance requiring hardware, software and option compatibility together.
FAQ
Why is the suffix after C98043-A1680-L1 important?
It identifies the CUR hardware revision, and Siemens documents option compatibility that can depend on minimum hardware and software versions.
What software record should accompany C98043-A1680-L1?
Provide the EPROM or software label, version, parameter backup and associated spare-software order information.
Is C98043-A1680-L1 the same purchasing identity as 6SE7090-0XX85-1DA0?
They are related CUR hardware and spare identities, but a quotation must preserve the full board revision, software and host-unit evidence.
What photos prevent a wrong C98043-A1680-L1 supply?
Capture the complete front and rear labels, EPROM, option boards, connectors, slot position and host converter nameplate.
What should be tested after replacing C98043-A1680-L1?
Verify diagnostics, terminal and communication interfaces, permissives, option functions and controlled infeed or regeneration.
Recommended Models
| IMI Norgren 33D 0863744 C0374 | ABB 1SDAO13856R1 | EK3041-U |
| Phoenix PPC 5315 SM 2900357 | 795-072-100 | LB 3102 GHG 127 0000 A 3102 |
| IRC5704-MW | 5TE7713 | XD3 XD1033 |
| EVD0000410 | 137058 TO C-306-05 | ED6008-MM-SC |
| AMS-8 | A61P | RC 0160 B |
| Heinz H1200 19/2-300 | DRT2-OD16TA-1 | BNS 519-D04-D12-100-10-FD |
| S7006 1891231 | 1FT6108-8AC71-2EBO | 5004 |
| E3751MS3A E3751MS3A_ GS | 11 SI DIL M | 6ES7134-6HD00-0BA1 |
| F84C-3AD-QP0 | HT9631P0100 | 411M2124FVS |
| E0002181 | 9404 462 35051 | EYS121 F001 |
