Bently Nevada 330330-070-00-00 HTPS Extension Cable
A 7.0 m non-armored spare extension cable for the matched 3300 XL 16 mm High Temperature Proximity System.
Overview
330330-070-00-00 is a spare extension-cable execution for the 3300 XL 16 mm High Temperature Proximity System. The replacement cable must be electrically matched to the existing probe.
A probe serial number is required when ordering because the spare cable is trimmed to the capacitance of the original matched assembly. This requirement distinguishes the HTPS cable from ordinary fixed-length extension leads.
Specs
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Model | 330330-070-00-00 |
| System | 3300 XL 16 mm High Temperature Proximity System |
| Component Type | Matched spare extension cable |
| Cable Length | 7.0 m (23.0 ft) |
| Stainless-Steel Armor | Without armor |
| Agency Approval | Not required |
| Matching Requirement | Probe serial number required for spare order |
| Cable Interface | HTPS probe connection to Proximitor Sensor |
Features
- Maintains the capacitance match required by the high-temperature probe system.
- Provides a non-armored cable route for the documented installation.
- Connects the machine-side probe assembly to the sensor electronics.
- Supports service replacement without changing the original matched probe.
Applications
- High-temperature turbine proximity measurement.
- Replacement of a damaged matched cable while retaining the installed probe.
- Remote routing between a 16 mm HTPS probe and sensor.
Lifecycle
- Preserve the original probe serial and cable data before disposal.
- Prevent crushing, excessive bending and contamination during installation.
- Inspect both connectors and the existing probe before ordering a spare.
- Retain the supplier matching record with the channel history.
FAQ
Why is the probe serial number needed for 330330-070-00-00?
The spare cable must be trimmed to match the capacitance of the existing HTPS probe rather than selected by length alone.
Can an off-the-shelf 7 m cable replace 330330-070-00-00?
No. The HTPS matching process, connector execution and exact ordering fields must all be preserved.
What routing evidence should accompany a 330330-070-00-00 enquiry?
Provide the original cable label, installed path, connector photographs, temperature exposure and support arrangement.
Can an armored execution replace 330330-070-00-00?
Only after mechanical routing and connector clearances are reviewed; the submitted model is the non-armored execution.
What should be tested after fitting 330330-070-00-00?
Check connectors, static output, calibration behavior, polarity and the full monitoring-channel response.
What should be retained after ordering 330330-070-00-00?
Keep the probe serial, matched-cable record, supplied cable identity and commissioning test results together.
Recommended Models
| RXZ7G 028348 | Murr 7000-74041-0000000 | 573912 |
| Danfoss 018F7658 | ELGA-TB-G-120-1700-0H | Murr Elektronik 8000-58522-0000000 |
| A12-30-10 1SBL161001R8410 | 6EP1336-1LB00 | GT1155-QSBD GOT1000 |
| R57 DRN90 | ABB ACS600 ACS60403206 XXXXX0XX9R | 140AVO02000AN |
| ABB 221052-AH | ABB 1SDA067414R1 | IF787 |
| Schneider SEGCPS4A | SEW R87 DT90S4/2/BMG | DNC-80-250-PPV-A-KP |
| 1-24DC/600AC-30 | 70-778-01 | 025-35150-001 |
| E244-16C-G-LS-SC-CR-SQ-BR | BNI0067 | GMA-1-5-100.1-ISCT-BA A5E43546473 |
| Siemens HC5106-0GZ11-1CU7-Z | P2GF2/011 + GF2/006RE01 + N01E4 | ANB10D-416 |
| 077092 | CAN-8DO | DT-7 |
