Bently Nevada 330876-03-10-00-00 Side-Exit Proximity Probe
A smooth 1.99-inch side-exit probe with 1.0 m unarmored cable and no approvals.
Product Overview
330876-03-10-00-00 is a 3300 XL 50 mm proximity probe with the smooth 1.99-inch-diameter side-exit case. It has a 1.0 m high-temperature FluidLoc cable without armor and the no-approvals option.
This mechanical execution is different from the 01 threaded straight-exit probe. For a 5 m or 9 m system, the 1 m probe must be combined with the correct extension-cable length and matching Proximitor Sensor.
Performance
- Provides non-contact sensing for long-range differential-expansion measurement.
- Uses a side-exit cable path where rear or axial cable clearance is constrained.
- Forms one calibrated system only when probe, extension cable and sensor lengths agree.
Technical Details
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Part Number | 330876-03-10-00-00 |
| Probe Family | 3300 XL 50 mm |
| Case Type | 03 — smooth 1.99 in diameter, side exit |
| Probe Cable Length | 10 — 1.0 m (3.3 ft) |
| Cable / Armor | 00 — high-temperature FluidLoc cable, no armor |
| Agency Approval | 00 — no approvals |
| System Requirement | Extension cable plus probe length must match sensor total length |
System Integration
- Compare side-exit mounting holes, cable direction and clearance with the machine bracket before ordering.
- Select the 4 m extension cable for a 5 m system or the 8 m extension cable for a 9 m system.
- Protect the unarmored cable and verify probe position using the official expansion geometry.
- Check loop output, target movement direction and monitor scaling after installation.
Applications
- Steam-turbine differential-expansion measurement
- Rotor-expansion measurement with restricted axial cable clearance
- Replacement of the same 1 m side-exit 50 mm probe execution
FAQ
What makes 330876-03-10-00-00 different from a 330876-01 probe?
The 03 code is a smooth 1.99-inch side-exit case; 01 is a straight-exit 1/2-20 threaded case.
Which extension cable is required with 330876-03-10-00-00?
Use 4 m for a 5 m system or 8 m for a 9 m system so the 1 m probe and extension cable equal the sensor calibration length.
Is 330876-03-10-00-00 armored?
No. Its armor code is 00, specifying unarmored high-temperature FluidLoc cable.
Does 330876-03-10-00-00 include multiple approvals?
No. The final 00 is the no-approvals option.
What photographs help verify 330876-03-10-00-00?
Send the label, side-exit case and mounting holes, cable route, extension-cable label and Proximitor Sensor label.
Recommended Models
| Lenze MCA 19S35-RS0P2-B28R-KS5F12N-R0SU | MDD112B-N-020-N2L-130GA0 | ACC2-2 |
| 174-Q | Y142300171 | LS682-DA-EN/F1 |
| DBC-0001 | T0-3-8007/E | TSXPSY3610 |
| X20RT8001 | DN2033 | Danfoss PVG PVP 210 BAR 83074300 |
| TETRA 4010 RX/SA | 175G5122 | ABB 83111-500-02 2TMA210010N0038 |
| DI439 | 3RT2028-1BF40 | EU5E-SWD-X8D |
| 2CDG110038R0011 | BWU2202 | Siemens 1AV3184B 1LE1023EB490AB4 |
| Schneider 140CHS11000 | CM-1-439 | WAGO 280-641 280641 |
| 2580260000 | Keyence DL-RS1A | KFD-160/2 ZA140 426301 |
| HLM45V13MPD | M6DS1603-8BA | 2CDG 110 051 R0011 |
