Uses eddy-current sensing for non-contact measurement of a conductive target.
Technical Summary
EZ1080-RM-00-010 is an Emerson AMS EZ 1000 8 mm eddy-current sensor. The complete code identifies the EZ1080 metric sensor family, reverse-mount construction, no unthreaded length and a 1.0 m cable.
The sensor is one element of a proximity measurement chain, so the converter, extension cable when used, total system length, target material and monitor-channel setup must be matched.
Specifications
| Manufacturer | Emerson |
|---|---|
| Exact ordering code | EZ1080-RM-00-010 |
| Product family | AMS EZ 1000 |
| Sensor type | 8 mm eddy current sensor |
| Base model | EZ1080 |
| Case thread | M10 x 1 |
| Mounting form | RM reverse mount |
| Unthreaded length code | 00 — no unthreaded length |
| Integral cable code | 010 — 1.0 m |
| Cable armor | No armor for EZ1080 |
| Measurement role | Non-contact shaft or target displacement sensing |
Features
Provides the reverse-mount geometry defined by the RM ordering element.
Uses a metric M10 x 1 sensor-body thread in the EZ1080 family.
Can be incorporated into an approved total system length with the compatible extension-cable arrangement.
Compatibility
- Match the compatible Emerson converter and the monitor input used by the installed AMS EZ 1000 system.
- If an extension cable is used, confirm that the 1.0 m integral cable and total electrical length are approved together.
- Verify reverse-mount clearance, thread, target material, bracket geometry and required measuring gap.
- Do not substitute another cable code or unthreaded-length option without recalculating the mechanical installation.
Replacement
- Measure and record the installed probe gap and axial position before loosening the sensor.
- Protect the coaxial cable and connector from twisting, sharp bends, contamination and impact.
- Set the replacement to the documented gap, then verify static output, runout and channel scaling.
- Keep the full RM-00-010 suffix in the asset record so the mechanical and cable configuration remains visible.
FAQ
What does RM mean in EZ1080-RM-00-010?
RM identifies the reverse-mount form, which changes the mechanical installation and must be matched to the existing bracket and clearance.
What cable length is built into EZ1080-RM-00-010?
The final 010 code identifies a 1.0 m integral cable; any extension cable must be selected as part of the approved total system length.
Can a standard-mount EZ1080 replace EZ1080-RM-00-010?
Not without mechanical redesign and system review because the mounting geometry is part of the exact ordering code.
What information should accompany an EZ1080-RM-00-010 enquiry?
Provide the complete sensor and converter labels, extension-cable number, total length, thread, bracket, target and monitor-channel details.
What should be verified before returning the sensor channel to service?
Confirm mounting security, cable condition, static gap output, dynamic response, channel scaling and the approved alarm path.
About IndustryParts
https://www.industryparts.com/Sensor codes are checked as mechanical and electrical configurations
IndustryParts keeps EZ1080-RM-00-010 tied to its reverse-mount geometry, cable length and complete proximity chain.
- RM geometry retained
- Cable code decoded
- Full measurement chain reviewed
Recommended Models
| IF787 | Moeller NZM7-100N-M | GCD-0001 |
| Siemens 1FT6084-1AF71-3AH1 | 21F5A3R-YR6A | LOG210 5005-0210 |
| DK32/K1/S | K21R71K4 TLB IEC | KSC-2/HF 031000086 7-450-95-008-5 |
| X20DS1119 | FC-302N160T5E54H4BGC3XXSXXXXALBXCXXXXDX | STI-6400 |
| ULXP4 , 829-865 Mhz-S3 | CS1W-ID261 | AB7834-F |
| OJ5158 | EDS-408A | CA-DW470EN-IR-0360B |
| Dell K20A | MAC071B-0-TS-2-C/095-B-0 | HDC01.1-A040N-PB01-01-FW |
| BNS 250-12Z-2187 | X20SO4110 | SN75461P |
| AD8 | EKI-2525PA | BZMD1-A125 |
| SR3 B101B | SIM-CNR04E | 2201-29400-001 |
