Lenze E84AVSCE7524VX0 7.5 kW Inverter Drive
A 7.5 kW StateLine C inverter for cabinet-based industrial motor control.
Overview
E84AVSCE7524VX0 is the 7.5 kW power-stage member of the Lenze 8400 StateLine C family. It provides general motor-control functions in a cabinet-mounted 400 / 500 V drive platform.
Replacement selection must use motor current, overload and option data in addition to the nominal power code.
Specs
| Manufacturer | Lenze |
|---|---|
| Complete Model | E84AVSCE7524VX0 |
| Product Family | 8400 StateLine C |
| Rated Motor Power Class | 7.5 kW |
| Mains Class | Three-phase 400 / 500 V class |
| Power-Stage Code | 7524 |
| Control Level | StateLine C |
| Motor Control | V/f and sensorless vector operation |
| Installation | Control cabinet |
| Protection Class | IP20 |
| Brake Resistor Reference Value in Lenze Setting | 27 Ω for the 7.5 kW power-stage column |
Features
- StateLine control level supports common speed and torque applications.
- Seven-and-a-half-kilowatt power stage addresses larger machine auxiliaries than the 1524 unit.
- Configurable control and status interfaces support machine integration.
- Complete hardware suffix remains essential for EMC and option matching.
Applications
- Conveyor, mixer, fan, pump and production-machine drives.
- Replacement of an installed 7.5 kW 8400 StateLine C unit.
- Cabinet modernization where the original motor, braking and controls are documented.
Lifecycle
- Export parameters and record the application and firmware versions.
- Document motor current, overload duty, braking resistor and all control wiring.
- Check cooling clearances and cabinet heat load.
- Test rotation, current, ramps, braking, network and safety interlocks under controlled load.
FAQ
Can E84AVSCE7524VX0 replace E84AVSCE1524VX0 because both are StateLine C?
No. They use different power stages, currents, protection and installation requirements.
What records are most important before replacing E84AVSCE7524VX0?
Keep the parameter archive, motor plate, I/O list, network settings, braking details and complete drive nameplate.
Does the 7.5 kW code guarantee motor compatibility with E84AVSCE7524VX0?
No. Rated current, overload, speed range and motor-control method must also fit the machine duty.
How should the braking circuit for E84AVSCE7524VX0 be checked?
Verify resistor value, continuous and peak energy, wiring, protection and the braking duty required by the machine.
Can E84AVSCE7524VX0 be commissioned by copying parameters only?
Copied parameters are a starting point; motor identification, wiring, direction, limits, interlocks and loaded behavior still require verification.
What should accompany an E84AVSCE7524VX0 enquiry?
Provide full labels, motor data, parameter backup, installed modules, cabinet photos and the required machine duty.
Recommended Models
| Grundfos UPSD 65 - 30 F340 | CL65-160 | 3VA1163-3EF36-0AA0 |
| Siemens 1PM6107-2LZ24-1AR1 | Lenel 110220001 | PSM-512S |
| OP921 | XAL Term 1223 | 25AYC10B |
| DPB01CM48 | 6ED1052-1CC01-0BA6 | O6H303 O6H-FPKG/AS/4P |
| REG-K/8x10 | HDA063Z | RDM2BT35S10 |
| GBW44307136 | 175H5021 | 2222 / 2222B1 |
| CCNA/125/M/075 | 51153884-201 | 281/N/P 007300300 |
| RKC REX-F900 F900F801-8*HJ-8NN-NN | SR2E201FU | 0-073-0291 |
| X206-1 6GK5206-1BB10-2AA3 | KaleidoRCP2 | SL20.100 |
| C40E-0403CA010 | UNDK 10N8914 | PCO3010AL0 |
