Siemens 6SE7024-7TD84-1HF4 MASTERDRIVES PEU Power Controller
A PEU power-controller module for 47 A SIMOVERT MASTERDRIVES units with a 510–620 V DC-link class.
Technical Summary
6SE7024-7TD84-1HF4 is a Siemens SIMOVERT MASTERDRIVES PEU power-controller module for 47 A units in the 510–620 V DC-link class. It is a power-stage service assembly rather than a complete standalone converter.
The final 1HF4 hardware suffix must be matched to the installed unit. Record the converter nameplate, power-section revision, semiconductor markings and cooling arrangement before ordering.
Specifications
| Manufacturer | Siemens |
|---|---|
| Model | 6SE7024-7TD84-1HF4 |
| Product Family | SIMOVERT MASTERDRIVES 6SE70 |
| Component | PEU power controller module |
| Unit Current Class | 47 A |
| DC-Link Class | 510–620 V DC |
| AC Application Class | Verify from the complete host converter rating plate |
| Hardware Variant | 1HF4 |
| Host Requirement | Match complete converter MLFB and power-stage configuration |
| Service Context | Legacy MASTERDRIVES power-section maintenance |
Features
- Identifies the 47 A PEU power controller by complete Siemens order number.
- Keeps the 510–620 V DC-link class attached to the service decision.
- Supports legacy MASTERDRIVES power-stage repair with revision control.
- Preserves the final hardware suffix required for connector and component matching.
Compatibility
- Match the complete SIMOVERT MASTERDRIVES converter nameplate and 47 A power stage.
- Confirm DC-link, AC rating, cooling and semiconductor assembly from the host documentation.
- Compare all control, gate, temperature and fan connections with the removed module.
- Do not assume interchangeability with 1HF3, 1HF5 or 6HF3 versions.
Replacement
- Save parameters, fault history and power-stage label photographs.
- Apply lockout, verify DC-link discharge and use ESD-safe handling.
- Test precharge, gate signals, temperature feedback, diagnostics and staged load operation.
FAQ
6SE7024-7TD84-1HF4: Why must the final 1HF4 suffix be retained?
It identifies the exact power-controller hardware variant; nearby suffixes may differ in coating, components, connectors or approved host use.
6SE7024-7TD84-1HF4: What host evidence is needed for an exchange?
Provide the complete converter MLFB, 47 A rating plate, DC-link data, module labels, semiconductor markings and cabinet cooling arrangement.
6SE7024-7TD84-1HF4: Can the module be bench-tested without the host converter?
Some component checks are possible, but final acceptance requires the matched converter, its control electronics, diagnostics and a controlled load test.
6SE7024-7TD84-1HF4: What repair report should a buyer request?
Ask for failure findings, replaced parts, insulation and static checks, powered functional test scope, serial traceability and warranty exclusions.
6SE7024-7TD84-1HF4: Which stored information should be protected before service?
Archive parameters, fault history, commissioning records, motor data and any machine-specific interlock or fieldbus configuration.
6SE7024-7TD84-1HF4: What restart sequence is appropriate after replacement?
Follow the Siemens service procedure, verify precharge and diagnostics, test without process load, then increase load in controlled steps while monitoring current and temperature.
Recommended Models
| LEHC 004344 | TZ2LE024M | ABB 926 115-AN |
| BCC0HNP | D1VW20HNJW75 | CPY000A200 |
| Siemens 3WL1208-3CB35-1AA4-Z | DRE90M4BE2/FT | WGMXMBSS4 |
| 7MF4433-1DA22-1AC7-Z | MJ100 | 800H-QR24G |
| BES0176 516-131-BO-C05 | BOS01L0 BOS 6K-PU-RH10-02 | 6ES5 530-3LA12 |
| 60/891.104.0 | M300 PN 58001304 | CJS20W |
| CEDIO-P 24/24/2-1131 | ALSPA MD2000 029301000 | 65.B16.104 R 43 RT250-M |
| IBS RL 24 DO 8/8-2A-LK-2MBD | 95K2035 | KFD2-ST2-Ex1.LB 109560S |
| RPS0025MD631P102 | PC301-K 01-310-301-K | Schneider BRH0853S1008 + |
| X20AP3132 | Siemens 6SE7131-2EF83-2NA0-Z L00 | ADPC-101 |
