Siemens 6SL3000-0BE21-6DA0 SINAMICS S120 Basic Line Filter
Compact 36 A basic line filter for selected SINAMICS S120 Active, Smart and Basic Line Modules and S120 Combi.
ManufacturerSiemensModel6SL3000-0BE21-6DA0Product TypeSINAMICS S120 basic line filter
01Product Identification
Siemens 6SL3000-0BE21-6DA0 is a SINAMICS S120 Basic Line Filter for selected 16 kW Active and Smart Line Modules, a 20 kW Basic Line Module and S120 Combi configurations. It is rated for 380 to 480 V three-phase supply, 47 to 63 Hz and 36 A. With 16 W power loss and a narrow 50 mm width, it provides a compact line-side filtering solution when the exact module assignment and Siemens installation rules are followed.
Configuration ControlVerify the full article number, nameplate, electrical design, interfaces, software, wiring and lifecycle requirement before ordering.
02Engineering Data
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3000-0BE21-6DA0 |
| Product Family | SINAMICS S120 |
| Product Type | Basic Line Filter |
| Compatible Modules | 16 kW Active Line Module; 16 kW Smart Line Module; 20 kW Basic Line Module; S120 Combi |
| Input Voltage | 380 to 480 V AC, 3-phase |
| Line Frequency | 47 to 63 Hz |
| Rated Current | 36 A |
| Power Loss | 16 W |
| Power Connections | Screw terminals |
| Maximum Conductor | 10 mm² / AWG 8 |
| Protective-Earth Connection | M6 |
| Protection | IP20 / UL open type |
| Lifecycle | Active product |
03Functions
Operational Functions
- Provides basic line-side filtering for the officially assigned SINAMICS S120 line modules.
- Supports 36 A rated current on 380 to 480 V three-phase systems.
- Limits component power loss to 16 W in the documented operating condition.
- Uses a narrow 50 mm construction for compact cabinet integration.
- Provides screw terminals supporting conductors up to 10 square millimetres or AWG 8.
- Supports S120 Combi installations within the documented selection and connection rules.
Identification
- Manufacturer: Siemens
- Model: 6SL3000-0BE21-6DA0
- Product Type: SINAMICS S120 basic line filter
- Status: Active product
04Applications
Use Cases
- 16 kW SINAMICS S120 Active Line Module installations using the basic-filter assignment.
- 16 kW Smart Line Module cabinets requiring the listed 36 A filter.
- 20 kW Basic Line Module line connections.
- S120 Combi systems whose Siemens documentation assigns this exact article.
- New or replacement industrial drive cabinets designed around the 50 mm filter width.
Compatibility Boundary
- Confirm the connected line-module or S120 Combi article against the official assignment.
- Use only on a 380 to 480 V three-phase supply at 47 to 63 Hz within the system limits.
- Size upstream protection and conductors for the complete line connection, not only the 36 A filter rating.
- Maintain the M6 protective-earth connection and prescribed low-impedance grounding.
- Follow Siemens cable-routing, clearance and cabinet-installation requirements for IP20 equipment.
- Do not confuse this basic filter with the heavier 6SL3000-0BE21-6AA0 wideband line filter.
05Lifecycle
- Siemens lists 6SL3000-0BE21-6DA0 as an active product.
- Keep the filter article and assigned line-module information together in the cabinet documentation.
- Confirm current firmware and commissioning guidance for the complete SINAMICS S120 system.
- Any change of filter type requires review of parameters, electrical ratings and EMC performance.
- After installation, inspect PE and power connections and verify startup, line current, DC-link behavior and fault-free operation.
