Siemens 6SL3000-0CE21-0AA0 SINAMICS Line Reactor for 10 kW Smart Line Module
A three-phase 380–480 V line reactor specified for the 10 kW SINAMICS Smart Line Module in booksize format.
Key Information
6SL3000-0CE21-0AA0 is the SINAMICS line reactor selected for the 10 kW Smart Line Module 6SL3130-6AE21-0AB1. Siemens states that the approved line reactor is required for Smart Line Module operation.
The reactor connects on a three-phase 380–480 V, 50/60 Hz supply. The line and load sides use screw terminals, and Siemens specifies a 10 mm² conductor cross-section.
Selection must preserve the exact paired Smart Line Module and connection design. Another reactor make or a nearby SINAMICS article should not be substituted by power class alone.
Functions
Condition the line-side path
Provides the required reactor function between the supply and the matched Smart Line Module.
Complete the approved SLM combination
Works with the documented 10 kW booksize Smart Line Module rather than as a generic standalone reactor.
Support controlled termination
Uses specified line/load screw terminals and the documented protective-earth arrangement.
Specifications
| Manufacturer | Siemens | Exact model | 6SL3000-0CE21-0AA0 |
|---|---|---|---|
| Product family | SINAMICS S120 | Product type | Line Reactor |
| Suitable Smart Line Module | 6SL3130-6AE21-0AB1 | SLM rated power | 10 kW |
| Line input | 3 AC 380–480 V, 50/60 Hz | Terminal type | Screw terminals |
| Conductor cross-section | 10 mm² / 8 AWG | Width × height | 177 × 196 mm |
| Compliance | cURus | Lifecycle | Active product |
Installation
Confirm pairing
Verify the complete Smart Line Module article and the approved reactor selection before installation.
Plan conductors
Check cable cross-section, terminal condition, protective earth and panel clearances.
Install safely
Isolate the line supply and DC link under the approved SINAMICS procedure before work.
Commission
Inspect connections and complete the line-module startup and diagnostic checks.
Lifecycle
- Pairing record
- Keep the reactor and Smart Line Module article numbers on one equipment schedule.
- Thermal arrangement
- Preserve the enclosure ventilation and spacing required by the drive-system design.
- No generic substitution
- Treat another reactor as an engineering change requiring Siemens-supported approval.
About IndustryParts
https://www.industryparts.com/Matched drive components remain one controlled equipment set
IndustryParts records the exact reactor, paired Smart Line Module, connection evidence and requested quantity before quotation.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
FAQ
Which Smart Line Module is paired with 6SL3000-0CE21-0AA0?
Siemens selects this reactor for the 10 kW booksize Smart Line Module 6SL3130-6AE21-0AB1.
Can a third-party reactor replace 6SL3000-0CE21-0AA0?
Siemens warns that other makes can cause malfunction or irreparable equipment damage, so use the approved pairing.
What installation evidence should accompany a 6SL3000-0CE21-0AA0 enquiry?
Provide the Smart Line Module label, supply voltage and frequency, conductor size, panel layout and existing reactor label.
Why should 6SL3000-0CE21-0AA0 not be chosen from kilowatt rating alone?
The exact Smart Line Module article, electrical connection and Siemens selection table define the approved combination.
What closes a 6SL3000-0CE21-0AA0 replacement record?
Matched articles, verified conductors and earth, correct tightening, clean diagnostics and a controlled line-module startup provide closure.
Request a model-specific quotation
Send the complete 6SL3000-0CE21-0AA0 label, requested quantity, delivery destination and installed-system context.
