Siemens 6SL3130-7TE23-6AA3 is a 36 kW SINAMICS S120 Active Line Module in the 150 mm booksize format. It provides a 600 V DC output rated at 60 A, uses a 55 A rated line current and operates with its designated Active Interface Module.

• Establishes the regulated DC-link supply for a compatible SINAMICS S120 drive lineup.
• Enables regenerative energy return through the correctly configured Active Line topology.
• Provides the 36 kW infeed class with a 60 A rated DC output.
• Uses DRIVE-CLiQ for system identification and communication within the drive group.
• Integrates internal forced-air cooling into a 150 mm-wide booksize cabinet position.

• Pair the module with Active Interface Module 6SL3100-0BE23-6AB0 and the documented line components.
• Allow for the 150 mm module width, internal fan airflow and specified service clearances.
• Engineer the line connection, protective devices, conductor cross-section, grounding and DC-link coupling for the 36 kW class.
• Preserve the complete 6AA3 identifier in the drive project and spare-parts list.
• Commission the infeed, DC-link regulation, regenerative path and all connected axes as one coordinated system.

• Siemens lists 6SL3130-7TE23-6AA3 as a PM300 Active Product.
• The current S220/S120 compatibility information includes this 36 kW S120 article for CU320-3 mixed operation.
• Keep the matching Active Interface Module and cabinet layout recorded with the line module.
• Do not exchange it with a 36 kW Smart Line Module; the infeed architecture and line components differ.
• Recheck current firmware and compatibility information before a Control Unit migration.