Siemens 6SL3351-6GE36-1AB3 Control Interface Board
A replacement control interface board for a high-power SINAMICS G chassis execution; match the exact AB3 revision and host drive.
Product Profile
6SL3351-6GE36-1AB3 is a Siemens replacement Control Interface Board listed in SINAMICS G service documentation. It is an internal converter spare and does not operate as a stand-alone automation module.
The complete GE36-1AB3 execution must be compared with the installed converter, chassis position and connector arrangement. Public manufacturer material identifies the spare relationship, while the host nameplate remains the controlling selection record.
Technical Data
| Manufacturer | Siemens |
|---|---|
| Model | 6SL3351-6GE36-1AB3 |
| Product Type | Replacement Control Interface Board |
| Drive Platform | SINAMICS G high-power chassis service component |
| Service Role | Internal converter control-interface replacement |
| Revision Boundary | Complete 1AB3 suffix must be retained |
| Installation Basis | Use only in the manufacturer-assigned host drive and cabinet position |
| Required Records | Host article number, board label, connector photographs and parameter archive |
System Role
- Provides the documented internal interface between the converter control architecture and its power section.
- Restores the assigned service-board function without changing the approved drive configuration.
- Supports diagnostics and control only as part of the matching SINAMICS chassis.
- Requires ESD-safe handling and manufacturer service procedures.
Compatibility
- Confirm the host converter article number and all installed options before release.
- Compare board revision, connector keying, mounting points and firmware-related service notes.
- Do not substitute nearby 6SL3351 control-board codes associated with different current or frame executions.
- Retain the original parameter and commissioning records for post-service verification.
Applications
- Corrective repair of the assigned SINAMICS G chassis converter.
- Planned spare holding for a documented installed drive fleet.
- Controlled refurbishment where diagnosis has isolated the control interface board.
FAQ
What information is mandatory before quoting 6SL3351-6GE36-1AB3?
Provide the full converter MLFB, drive nameplate, existing board label, hardware revision, connector photographs and parameter backup.
Why is a visually similar 6SL3351 board not enough to replace 6SL3351-6GE36-1AB3?
Adjacent boards can belong to different frame, current and connector executions; only the documented host assignment establishes compatibility.
What diagnosis should precede an 6SL3351-6GE36-1AB3 exchange?
Check auxiliary supplies, power-stage faults, fiber or ribbon connections, cooling and control-unit diagnostics so another failed component is not misidentified.
How should 6SL3351-6GE36-1AB3 be handled during service?
Follow safe isolation and DC-link discharge instructions, then use grounded ESD controls and preserve every connector position during removal.
What acceptance test follows installation of 6SL3351-6GE36-1AB3?
Restore the approved configuration, review diagnostics and verify enable, I/O, communication and controlled motor operation before production release.
Recommended Models
| O1D155 O1DLF3KG | 99-000008-02 | WL160T-P412 |
| 1SBN050100R1002 | R35000 | YD24PBV3 |
| E-HSI-M 11025 D1711B | GMP 16 313116 | BK5151 |
| 1734-CTMK | FCH-25C | AZM 161SK-12/12RK-110/230 |
| REG-K/230/600 | CVG2812-2MP | NXS00455-A2H1SSS-A1A2000000+QGLM+FL23+DPAP+DLDE |
| S2-WS120-24-M5 | AC.IS.3400000 | NFX-TDIFF-IV A1R |
| SD315DN10B400 | FX1s-10MR-001 | CES-A-AEA-02B |
| 65478 ET5S | 4WE 6 J62/EG24NK4 | JMFH-5-1/8 |
| SOUNDSTATION2 / 220-16155-001 | AM3VMABM3003 | TSXP57202 |
| K47 DRN90S4/BE2/MM22/MO/EI71 | GJR2242000R1 LR370A-E 9083/031 | VJP-4E |
