Siemens A5E36717797 IGD2/R4 310 A Trigger Interface Board
A Siemens IGD2/R4 board identified for the 480 V / 650 V DC, 310 A class with TIM designation.
Overview
A5E36717797 is a Siemens IGD2/R4 board listed for a 480 V AC / 650 V DC, 310 A class execution with TIM designation. The material number defines a specific service identity within the power stage.
The board must remain associated with its documented host assembly. Similar IGD2/R4 boards can differ in current class, hardware execution and surrounding semiconductor arrangement.
Specs
| Manufacturer | Siemens |
|---|---|
| Material Reference | A5E36717797 |
| Board Designation | IGD2/R4 |
| AC Class | 480 V |
| DC-Link Class | 650 V DC |
| Current Class | 310 A |
| Description Suffix | TIM |
| Service Category | Power-stage board |
| Selection Control | Full host and board labels |
Features
- Provides the defined IGD2/R4 interface for the documented 310 A execution.
- Keeps the board-level service reference distinct from higher-current neighboring material numbers.
- Supports traceable repair when revision, connectors and companion hardware are matched.
Applications
- Repair of the matching Siemens industrial drive power stage.
- Controlled spare replacement for an installed A5E36717797 board.
- Service investigation after power-component and auxiliary-supply checks.
Lifecycle
- Photograph all labels and connectors before disturbing the power stage.
- Resolve shorted devices, supply faults, contamination and cooling problems before replacement.
- Preserve ESD control, insulation distances and thermal-interface requirements.
- Verify gate commands, feedback, protection and controlled operation after installation.
FAQ
What distinguishes A5E36717797 from A5E36717799?
A5E36717797 is documented as the 310 A IGD2/R4 execution; the neighboring A5E36717799 reference is identified with a different current class.
Can A5E36717797 be ordered from the board family alone?
No. The exact material number, host article, revision, connectors and power-stage labels should be supplied with the request.
Is A5E36717797 a complete SINAMICS drive?
No. It is a service board used within a matching drive power-stage assembly.
What should be diagnosed before installing A5E36717797?
Check the semiconductor devices, auxiliary rails, gate wiring, feedback, insulation, heat transfer and the original fault mechanism.
Can another IGD2/R4 revision replace A5E36717797?
Only a documented Siemens relationship or an approved host-specific repair instruction can establish that substitution.
Which acceptance tests apply to A5E36717797?
Use the host procedure to prove insulation, gate control, feedback, protection response, cooling and staged operation.
Recommended Models
| MTN683901 | EL3910A8008 | KA29B DRN71M4/BE05/TF/EI8R |
| Siemens 6ES7151-7AA11-0AB0 | 5ST-PFB-CLX | S179DB/F84 |
| 4574821 | BWU1702 | 37PC/UI-S |
| 3HE11904AARB01 RJ45 | SR2E201FU | 1606771 LEHC 002054 |
| CX1100-0002 | 2CDG110063R0011 | VAL-SEC-T2-4+0-440-FM |
| ADF134D-B05TA0-BS07-A2N1 | IM1-12EX-T | NJ20 + U1 + A2 |
| ML7174E 2007 | 30.160.1.1 2CDG 110 144 R0011 | 6321001A |
| g34296470800 | 140CPS11410 | Schroff PSK 22411001-199 |
| MF6FTJ0026 | ABB SDCS-APD-2 61268570A | 4PP065.0571-K57 |
| Siemens 6SC6101-2A-Z Z=2xA30+G10+V12+B12 | MSLS03-22271 | AB7533-F |
