Bently Nevada 330171-00-15-10-11-05 3300 5 mm FluidLoc Proximity Probe
A compact 1/4-28 UNF 5 mm probe with a 1.5-inch case, 1.0-metre FluidLoc cable, protected ClickLoc connector and multiple approvals.
Product Overview
330171-00-15-10-11-05 is the 1.5-inch-case execution of the unarmored 330171 5 mm proximity probe.
Unlike the 2.2-inch case in another 330171 configuration, this exact code retains the shorter 1.5-inch body while keeping the same 1.0-metre FluidLoc lead and protected ClickLoc connector.
The multiple-approvals suffix and complete case geometry must remain visible in inventory and installation records.
Performance
Serve compact threaded mounts
The 1.5-inch case addresses a different reach and engagement requirement than longer 330171 bodies.
Measure conductive targets
The complete 5 mm system supports static position and dynamic vibration measurement.
Preserve protected FluidLoc routing
Cable and connector selections remain part of the ordered probe identity.
Technical Details
| Manufacturer | Bently Nevada | Exact model | 330171-00-15-10-11-05 |
|---|---|---|---|
| Probe family | 3300 5 mm | Base probe | 330171, without armor |
| Case thread | 1/4-28 UNF | Unthreaded length | 0.0 in |
| Overall case length | 1.5 in | Total probe length | 1.0 m (3.3 ft) |
| Cable type | FluidLoc | Connector | ClickLoc with protector |
| Approval option | Multiple approvals | ||
About IndustryParts
https://www.industryparts.com/Case length remains a primary mechanical selection point
IndustryParts separates the short-case probe from neighboring 330171 executions by retaining the complete label and mounting record.
- •Exact submitted model retained
- •Installed-system evidence reviewed
- •Requested quantity linked to the enquiry
System Integration
Compare the installed reach
Measure threaded engagement and tip position before removing the 1.5-inch case.
Record the full chain
Capture extension-cable and Proximitor Sensor identities together with the probe.
Preserve the protected connection
Maintain connector protection, cable seal condition and route supports.
Return the channel to service
Restore the documented gap and verify stable monitor response.
Applications
Short-case probe installation
Using the 1.5-inch case where the longer 330171 geometry would change tip position.
Restricted-space proximity sensing
Applying the 5 mm probe where an 8 mm probe is mechanically unsuitable.
Approval-controlled maintenance
Keeping the 05 multiple-approvals suffix with the installation record.
FAQ
Can the 2.2-inch-case 330171 replace 330171-00-15-10-11-05?
Not by family number alone. The different case length changes threaded reach and probe-tip position.
What dimensions should accompany a 330171-00-15-10-11-05 enquiry?
Provide overall case length, thread engagement, tip position, target clearance and the full label.
Why is the protected FluidLoc connector important for 330171-00-15-10-11-05?
It is part of the ordered 11 execution and should remain consistent with the installed cable environment.
What chain labels are required before servicing 330171-00-15-10-11-05?
Record the probe, extension cable, Proximitor Sensor and receiving monitor channel.
How should 330171-00-15-10-11-05 be accepted after replacement?
Confirm the 1.5-inch reach, restore gap, check stable output and complete the approved monitor test.
Request a model-specific quotation
Send the complete 330171-00-15-10-11-05 label, requested quantity, delivery destination and installed-system context.
