Siemens 6ES7416-3ES06-0AB0 SIMATIC S7-400 CPU 416-3 PN/DP
ManufacturerSiemensModel6ES7416-3ES06-0AB0Product TypeSIMATIC S7-400 CPU 416-3 PN/DP central processing unit
01Key Information
Siemens 6ES7416-3ES06-0AB0 is the firmware V6.0 generation of the SIMATIC S7-400 CPU 416-3 PN/DP. It provides 16 MB of work memory and combines an MPI/PROFIBUS DP interface, an integrated Ethernet/PROFINET interface and an additional PROFIBUS DP interface position. The controller is designed for mixed central and distributed automation architectures where the STEP 7 hardware support, PROFINET configuration, PROFIBUS parameters and installed interface hardware are controlled together.
Selection ControlVerify the complete article number, hardware revision, firmware, memory, interfaces, engineering software and system architecture before ordering.
02Functions
Core Functions
- Executes large standard S7-400 control applications using 16 MB of integrated work memory.
- Supports MPI/PROFIBUS DP communication for programming, HMI, controller and distributed-I/O functions.
- Provides integrated Ethernet/PROFINET communication for IO-controller and industrial communication tasks.
- Supports an additional PROFIBUS DP path through the documented interface arrangement.
- Supports S7 routing and extended PROFINET diagnostics in the documented V6.0 generation.
- Coordinates central modules, PROFINET devices and PROFIBUS slaves within one engineered CPU project.
Product Identity
- Manufacturer: Siemens
- Model: 6ES7416-3ES06-0AB0
- Product Type: SIMATIC S7-400 CPU 416-3 PN/DP central processing unit
- Status: Firmware V6.0 S7-400 PN/DP generation
03Specifications
| Manufacturer | Siemens |
|---|---|
| Article Number | 6ES7416-3ES06-0AB0 |
| Product Designation | CPU 416-3 PN/DP |
| Automation System | SIMATIC S7-400 |
| CPU Type | Standard PN/DP central processing unit |
| Firmware Generation | V6.0 |
| Work Memory | 16 MB total |
| Program / Data Memory | 8 MB / 8 MB |
| Interface X1 | MPI / PROFIBUS DP |
| Ethernet Interface | Integrated PROFINET |
| Additional Fieldbus | Documented PROFIBUS DP interface arrangement |
| S7 Routing | Supported |
| Extended PROFINET Diagnostics | Supported from the documented V6.0 generation |
04Installation
- Match firmware V6.0, the STEP 7 hardware-support level and the original project before loading.
- Document X1 mode, MPI or PROFIBUS address, transmission rate and all configured stations.
- Preserve PROFINET device names, IP addresses, update times, topology and media-redundancy settings.
- Verify the exact additional PROFIBUS interface hardware and its bus configuration.
- Check every communications processor against Siemens compatibility records for this CPU and firmware.
- After exchange, test all central I/O, PROFINET IO, PROFIBUS devices, routing, diagnostics and application timing.
05Lifecycle
- This page describes the exact firmware V6.0 CPU generation; current Siemens service and order status should be confirmed.
- Do not copy the hardware configuration from the V7.0 article 6ES7416-3ES07-0AB0 without checking firmware and engineering differences.
- Archive the STEP 7 project, firmware package, memory-card image and all network records.
- A firmware or hardware-generation change requires regression testing of networks, diagnostics and the user program.
- Plan lifecycle work around the complete S7-400 station rather than the CPU article alone.
