SINAMICS G120 | 132 kW filtered FSF power stage
Siemens 6SL3210-1PE32-5AL0 SINAMICS G120 PM240-2 Power Module
A Class A filtered 380–480 V PM240-2 with 132 kW low-overload and 110 kW high-overload ratings.
BrandSiemens
Model6SL3210-1PE32-5AL0
Product TypeClass A Filtered PM240-2 Power Module
01
Key Information
6SL3210-1PE32-5AL0 is a frame-size FSF SINAMICS G120 PM240-2 power module with an integrated Class A EMC filter and braking chopper. It is designed for three-phase 380 to 480 V industrial drive supplies.
The two published duty points are 132 kW for low overload and 110 kW for high overload. This distinction lets the power stage be selected against the application load cycle rather than by one nominal power figure.
02
Functions
- Provides the inverter power stage under control of a compatible modular SINAMICS Control Unit.
- Integrates a Class A EMC filter for the AL0 configuration.
- Includes a braking chopper for use with an externally selected braking resistor.
- Delivers separate current reserves for low-overload and high-overload operating profiles.
- Uses forced internal airflow to cool the FSF power electronics.
03
Specifications
| Manufacturer | Siemens |
|---|---|
| Article Number | 6SL3210-1PE32-5AL0 |
| Product Family | SINAMICS G120 / PM240-2 |
| Input Supply | 3 AC 380–480 V, ±10%, 47–63 Hz |
| Rated Power, LO | 132 kW |
| Rated Power, HO | 110 kW |
| Rated Input Current | 242 A LO / 218 A HO |
| Rated Output Current | 250 A LO / 205 A HO |
| Maximum Output Current | 410 A |
| Pulse Frequency | 2 kHz rated; 4 kHz maximum |
| EMC Filter | Integrated Class A |
| Cooling | Internal air cooling, 0.153 m³/s |
| Motor Cable Limit | 300 m shielded / 450 m unshielded |
| Protection / Frame | IP20 / UL open type; FSF |
| Operating Temperature | -20 to +40 °C LO / -20 to +50 °C HO |
04
Installation
- Maintain 0.153 m³/s of cooling airflow and the cabinet clearances specified for frame FSF.
- Use the documented M10 line, motor and PE connections and size conductors for the installed duty.
- Confirm the complete EMC installation even though a Class A filter is integrated.
- Select the Control Unit, protective devices, braking resistor and motor cable as one drive system.
- Parameterize the motor and overload duty before production operation.
05
Lifecycle
- Preserve the AL0 suffix when ordering because the similar UL0 variant has no integrated filter.
- Record whether the machine uses the 132 kW low-overload or 110 kW high-overload rating.
- Inspect the fan path and cabinet heat removal during preventive maintenance.
- Back up the Control Unit parameter set and verify the braking circuit before a module exchange.
