IC695ALG708 is a PACSystems RX3i analog output module with eight configurable current/voltage output channels. It belongs to the rack-based RX3i I/O family used in mission-critical discrete and process applications.

A replacement must preserve each channel range, scaling, fallback behavior, terminal wiring and controller reference. The module should be commissioned as part of the complete output loop rather than judged from an unloaded value alone.

• Provides eight analog output channels in one RX3i rack position.
• Supports configured current and voltage output applications.
• Integrates with RX3i controller diagnostics and project-based channel configuration.
• Offers the standard RX3i rack-based mechanical and backplane interface.
• Supports process actuators and analog setpoint paths within the approved module limits.

• Export channel ranges, scaling, fallback states, alarms and controller references from the approved project.
• Record the IC695ALG708 label, terminal assembly, field loads, loop power, commons and shield terminations.
• Place every controlled device in the approved safe state before disconnecting an output.
• Restore each current or voltage channel from the checked loop schedule and verify polarity before enabling control.
• Test zero, span, intermediate command, fallback behavior, alarms and final actuator response for every used channel.

• Analog setpoint and command outputs in PACSystems RX3i process control.
• Current-loop control of compatible valve, drive and instrumentation interfaces.
• Voltage-command applications within the approved IC695ALG708 configuration.
• Revision-controlled replacement of installed RX3i analog output hardware.