6SL3224-0BE34-5UA0 is a Siemens SINAMICS G120 PM240 Power Module for three-phase 380 to 480 V AC supplies. It provides 55.00 kW low-overload and 45.00 kW high-overload motor duty in the FSF format.

The module has no integrated filter and an integrated braking chopper. It operates with a compatible SINAMICS G120 Control Unit and the line-side, motor and cabinet components selected for its current class.

• Provides 110.00 A low-overload current and 90.00 A high-overload current for a modular G120 drive.
• Delivers up to 180.00 A maximum output current under the documented overload profile.
• Uses an unfiltered power-stage configuration together with an integrated braking chopper.
• Uses FSF internal-air-cooled construction with 0.150 m³/s cooling airflow.
• Supports vector-control output frequencies to 200 Hz and V/f output frequencies to 550 Hz.

• Use 6SL3224-0BE34-5UA0 with a compatible SINAMICS G120 Control Unit and supported firmware for the installed machine.
• Size the motor and protection for the 110.00 A LO or 90.00 A HO current profile actually used.
• Provide the external EMC measures required by the unfiltered UA0 configuration.
• Keep motor-cable length within 50 m shielded or 100 m unshielded under the documented installation conditions.
• Provide 0.150 m³/s airflow and preserve the FSF mechanical envelope.

• Siemens lists 6SL3224-0BE34-5UA0 as a spare part with product cancellation effective 1 October 2019.
• Retain the complete 6SL3224-0BE34-5UA0 suffix because it identifies the unfiltered UA0 construction.
• Record the connected Control Unit, firmware, motor data, parameter set and braking circuit before exchange.
• Confirm the FSF dimensions, 36.00 kg handling weight and m8 bolt, 25.00–120.00 mm² during retrofit planning.
• Verify protective devices, cable routing, cooling and commissioning under the machine safety procedure.