Acquires 32 discrete field states in a compact VersaMax module footprint.
Product Overview
IC200MDL650M is a VersaMax modular I/O input module that brings 32 discrete 24 VDC field signals into the control station. Its points are arranged as four groups of eight.
Positive- or negative-logic field wiring is supported at the base-model level. The M suffix and installed carrier and terminal arrangement should remain in the replacement record.
Performance
Organizes the signals into four groups of eight for commons-based field wiring.
Supports positive- or negative-logic circuits according to the installed design.
Provides point indication for commissioning and group-level troubleshooting.
Technical Details
| Manufacturer | Emerson / legacy GE Fanuc |
|---|---|
| Exact model | IC200MDL650M |
| Platform | VersaMax Modular I/O |
| Module function | Discrete DC input |
| Input count | 32 points |
| Nominal input voltage | 24 VDC |
| Logic support | Positive or negative logic |
| Grouping | Four groups of eight inputs |
| Mechanical interface | VersaMax carrier and compatible terminal base |
| Hardware revision | M |
System Integration
- Map all four common groups, field polarity and point numbers before moving any conductor.
- Confirm the VersaMax station configuration assigns 32 input points to the correct slot.
- Inspect carrier contacts and the terminal base before reusing them with the M revision module.
- Test ON and OFF recognition in every group while monitoring the controller input table.
Applications
- High-density 24 VDC machine status and interlock acquisition.
- Distributed VersaMax nodes using contacts or compatible solid-state sensors.
- Legacy installations where four common groups and M revision identity must be preserved.
FAQ
Can IC200MDL650M replace IC200MDL650L without review?
Do not assume suffix interchangeability; verify the M revision, controller release, carrier, terminal base and any site qualification.
What wiring evidence is needed for IC200MDL650M?
Provide the four group commons, field polarity, terminal-base identity, sensor types and clear photographs of the installed label.
How can a common failure be distinguished from an IC200MDL650M point fault?
Compare several points in the affected group and measure the common and field supply before replacing the module.
What should incoming inspection cover for IC200MDL650M?
Verify the M suffix, housing keys, carrier contacts, terminal-base fit and absence of corrosion, impact or heat damage.
How should IC200MDL650M be commissioned?
Confirm station recognition and exercise representative ON and OFF signals in all four groups while checking the live input table.
About IndustryParts
https://www.industryparts.com/Revision and four-group wiring are controlled together
IndustryParts prepares IC200MDL650M with the M suffix, carrier, terminal base and four field commons recorded.
- M revision retained
- Four groups mapped
- Polarity verified
Recommended Models
| 084B8020 | 17N17-RS0B0-Z0F0-KKBF19N-R2SU | 97702345 |
| HD 1308.600 | HNWG50086423-006 | X1P1802FZBB |
| MG180MB2-48FF300-H3 | PS00E03knx | 140AC002000 |
| PSL 3/160-3 | SV 5.690/1-01 | Eaton DG1-34140FN-C21C |
| SEW WH37 CMP50S/BK/KY/AK0H/SB1 | NF 085-503 | DFC-322R3-240 |
| 1399.19.0024 | DF642-00003002/IP44 | 48-4103 |
| D41VW043E2NJWTI5N91 / D1VW004EN | 6AV7240-3BC07-0HA0 | CAMC-G-S3 1501331 |
| EK3041-U | PS-DA0412-026 | SLEEK 9243 |
| CSH01.1C-SE-EN2-NNN-MEM-NN-S-XP-FW R911335439 | DNU-80-320-PPV-A | TX 5741 |
| BFN 3-1-56 | KAZ37 DT71D4/BMG/TH/ISU43 | X20D04529 |
